Separate names with a comma.
And dripping onto the exhaust? I had a similar situation with my 916, had a leak through the clutch pushrod oil seal. Nothing noticeable whilst...
Amazon; https://www.amazon.co.uk/Ducati-Fuel-Level-Sensor-Nut/dp/B09MJ4LSWD
I wonder why anyone would be selling a legit bike without a V5? For £25 all doubt could be removed, ask the seller to get a V5, check that all...
As above, if it's only a rattle it may not be as serious, could it be something in the selector mechanism under the left side crankcase cover?...
My Monster did the same with 6th gear, it should be obvious if teeth are missing without splitting the engine. Here's what I found in the oil;...
Alternatively, you could drill the standard yoke. Just don't use the drain hole as a guide because it's not central; [IMG] [IMG]
It's not wise to park a bike on a downward incline on any sidestand, always park it uphill if there's nowhere flat, leaving it in gear is not a...
Indeed, I forgot to mention that. The existing tray will work (without the rubber mat) but the upper bracket isn't wide enough, I made one from a...
That's the one, it's a heavy thing but, my 916 starts on the first touch of the starter every time with it. I have the same one on the Monster...
As above, new belts before you even think of starting it. Whilst in there check the valve clearances and remove the cams to check for rocker wear,...
As above, once the belt's off and with the piston down the cylinder, try turning the camshaft by hand. If anything's damaged or bent it likely...
That's how they are, they can flex a little under braking but don't really 'float' as such. You can get full floating buttons to fit them though...
I think you'll find that the bearing seat is, for weight reduction purposes, only as thick as it needs to be for the hub casting strength and so...
As above, there is a locating lug in the plastic mudguard clamping bracket but it only acts as a guide and the speedo drive will stay in place...
If freshly rebuilt, I don't see why you'd need to check the head bolt torque or even the belts after 1,000 miles though the belts are easy enough...
I think the bike makes a big difference? I've been using various iterations of Rossos on my 916 and they last fairly well, currently got Rosso 3...
To answer the first question, old Monsters have a similar connector but not certain how many pins and can't check because I cut mine off to fit a...
The bolts have a shoulder that sits on the tank so, no regardless of how much you tighten them they're not clamping the 'O' ring any harder - just...
Not sure about the Nitrile? I bought Viton as they are definitely fuel resistant. A while back the fuel cap on my Guzzi was leaking when the fuel...
Indeed, I bought a job lot of Viton rings for mine from an industrial supplier a few years back, there was a minimum order amount of £10 (for free...
