Separate names with a comma.
Maybe but I've bought older, more obscure parts from them before, no problems. If the OP can make it himself, fair enough but if an engineer is...
Ducati parts online list it on their website at £6. https://www.bike-parts-ducati.com/ducati-motorcycle/assignment_spare_parts/83210271B
Should be an easy repair, hopefully the indicator will hide any bodging! As an aside, I have carbon intakes on mine from QB carbon. A couple of...
Did any 916 model bikes come with carbon intake ducts? because I've never seen them...
Agreed, my regulator was replaced due to an incident where the battery got broken and leaked acid over it. The replacement is still going strong...
I have used OEM Ducati plates, 'Ducati Racing' sintered plates and now Newfren plates which I have in both the 916 and Monster and I can safely...
I had one like that, first time I used it, it snapped like a carrot. Best to use the old school long-handled metal versions IMO.
I found some on ebay but, otherwise Ducati dealers can supply them.
To add: My Monster (Oberon slave, RCS master) has around 1.5mm of lift and the 916 (Evoluzione slave, OEM master) has around 1.8mm. The Monster...
38.5mm is on the thick side IMHO, especially with a larger slave cylinder. Both mine have larger slaves (Oberon & Evoluzione) and work perfectly...
Does that part of the surface, right at the edge actually run on the cam though?
Afraid not, another forum member had it for the same reason a few years back.
Reversing the plate would work (if it fits in reverse). 916 models have a plate/deflector in the dip beam that determines L/R dip and it can be...
I had mine re-done by Newman years ago after dealing with numerous flakey rockers (including new replacements) and, combined with MBP retainers I...
Stainless springs are a good thing, no more rust though you may find they're stronger than the originals. As for the pressure plate, I just spray...
Suppose it'll appeal to the new money Bentley owner (Footballers etc.) that wouldn't otherwise have bought a bike but will make an exception for...
Prior to fitting a mono subframe I had a mono seat on biposto frame and you need a different mounting bracket with more offset for the latch pin...
I wore Arai for many years, fitted me just fine until they changed something with regards to the opening size? I couldn't even get it on my head....
Do you mean the crank plug as in this pic? [IMG] A little tricky to see through the top of the engine but if there's no protrusion, you're...
I seem to recall reading, on another forum that 999 type wheels are wider at the hub to allow for a wider sprocket offset, in turn allowing for...
