Separate names with a comma.
I have one of those cam locking tools but it doesn't fit because the cams have been degreed and so sit slightly off the standard position, as such...
Agreed, maybe not D8EA but I'm using NGK plugs in all my bikes and have had no problems. I used to replace them regularly as 'service items' but...
I would go for 38mm pack thickness at the most. You may need to switch some 2mm for 1.5mm plain plates to get there? Not sure if 1mm plates exist...
When I changed the engine in my Monster, they wanted proof of capacity/engine no. from the garage that fitted it. As I fitted it myself I didn't...
Heavier duty starter cables are likely to help (at least on on older models they do), don't assume Ducati got it right, rather they saved a couple...
Indeed, a 12v battery is a 12v battery so, no matter how big (AH) it is, it will be fine. Car engine running might cause problems though.
My Monster has always turned over slowly but recently got worse, and due to it having no chokes in the carbs it can easily flood if it doesn't...
Quite possibly but the seat pad should be the same and so fit the older seat/subframe, minus the brackets of course.
IIRC later bikes had the extra brackets to help secure the seat. I think because the older, no bracket seat, was more likely to detach if the bike...
Does this help? [IMG]
To add, Chris is the man. He worked wonders on my 916 and Monster - highly recommended. :upyeah:
Welcome and, with regards to the 848 wheels I think the rear should fit but the front will not, at least not without major work. For starters the...
A pocket.
I'd get the renthal (or similar) carrier, in fact I did after mine popped a cush drive and chewed up the eccentric - it all happened in just a few...
Unless it's race bike and you're at an elite level, you're probably better off using stainless, certainly from a price point of view. Titanium is...
Can't confirm 100% but I know that a 999 top yoke will fit a 916 forks/stem because I did fit one to mine once, only thing that doesn't work is...
Mine melted the fuse holder, looked like a lump of sticky snot - was still working fine though. Simple enough replacement and a reminder to keep...
I've got MBP retainers in both my 916 and M900, only the 916 needs the modified opener shims as the M900 shims are bigger and the retainers fit...
If it's only 8cm, something like this; https://www.ebay.co.uk/itm/254506325288 My latest workshop extension has around a 9cm kerb to the...
I think there were some 750s with a dry clutch though only a 5 speed gearbox. There were different versions of 900 head, do the heads have a...
