Separate names with a comma.
Nice but, those Dzus clips facing forwards make my teeth itch...
Have also re-used the 'O' ring, just let it dry out and it shrinks back to original size. Though a couple of years back I bought a lifetime's...
Unlikely an old filter would cause a complete stop of fuel? spluttering/rough running etc. especially at big throttle openings, even fuel pump...
Also linked to the breather (by the 'Y' connector) so can cause running problems if it is blocked but, as above not if not connected.
No.
Do you have the original plastic, quick-release fittings on the fuel pump/tank base? You could try 'cycling' the pump (ignition on) with the...
Underseat injector relay/fuse? Split pipe on the fuel pump?
You are, of course correct and I stand corrected. In which case they are even less of an upgrade. Actually I've removed them anyway as the flange...
Check the valves (especially the exhaust) for play/movement within the guides. I recently had my 900 engine apart for gearbox work and was...
[IMG]
Slightly O/T but the 40mm downpipes on my Guzzi have 2mm walls whereas the original 38mm are only 1mm wall meaning that the +2mm 'performance'...
Agreed, quite common and if so, it'll probably look like this; [img]
My experience tells me that when exhausts are marketed as 45, 50, 54mm or whatever, it is the OD of the pipe that is the reference. e.g. my 916...
Get a syringe, connect it to the bleed nipple and fill it from there, effectively pushing the air through to the reservoir. Then just purge the...
Is this to use with a biposto subframe? because on my mono seat with mono subframe there is no spacer.
Quite common, I'm afraid. On my way home from the first service, the same happened to my 916. Gradually slowed down until, at a roundabout it...
I have 1098 Ohlins in my 916 though I did have Ktech fit their valving at the same time as lighter springs (9.5 IIRC) - the standard springs were...
Exactly, I have done many mods to my 916; more power, less weight, brakes, suspension etc. but the biggest gain by far was fitting lighter wheels.
Actually, you don't need to lock them. Just be aware that you need to hold in place due to it being on the 'spring' and trying to move. I've got...
