Separate names with a comma.
take the old 996 etc they really suffered with a lack of swing arm angle .long engine, short arm etc etc so I recon the fact the chain adjust was...
[ATTACH] So the std rear calliper bracket won't let the centre of the rear axle go as low as the picture above which is at 6 o clock. As std it...
Ultimately you need one of these! [ATTACH]
Changing the sprocket size has everything to do with altering the ride height as you will undoubtedly adjust the chain. Rotating the eccentric to...
No cops here chap… though I remember something about gathering all evidence and I thought you were better than name calling ♂️ Anyway you sold...
Mate, its your dummy you can spit it as far as you like...I do! I prefer the Na na nana na na na defence though:joy::upyeah: I know when jhp...
there is a rumour that jet prime are developing a bypass gizmo for the v4 abs......but who knows?
During the war...
With the Panigale V4 electronics, if Bikesportsdevelopments Mick Boesman has looked into and concluded you can't by pass the ABS unit because its...
[ATTACH] It says they are 330mm so the difference why you need bigger spacers will be down to the callipers. I have to say I don't get the...
So what are you doing with the ABS.......and more importantly its contribution and involvement in things like the engine braking strategy...?...
if I were building what you are doing I would buy a pair of the 2020+ tie bars (from Ducati reasonably cheap) and alter the length of your shock...
what length did you set the shock to? and what spec tie bars are you using? The originals?
Got this.....AEM as supplied by conquest racing... [ATTACH]
What rear sprocket carrier are you using Dean?
All sold.....:joy:
I've got some bits available too jet prime race key button plug and play jet prime race left switch gear plug and play RCS 19 master cylinder...
For a start the Euro 4 (pre 22) only has two lambdas, the Euro 5(22 on) has 4, one per cylinder. As the Ducati fit Akra tends to keep the lambdas...
I thank you.... ;-0
have you changed/ fitted the fuel filter the correct way around and tightened/fitted the pipes correctly, plus are the pipes new not split?
