Separate names with a comma.
OK, not sure why I got that model (can't even remember where I got it?) but I can confirm that it fits fine and has sufficient stroke end to end...
There appear to be several models that fit. The Ohlins on my 916 is stamped 'SD1222', don't know if that helps...
[IMG]
I have the HPK discs and calipers on my 916 along with a 19mm, 20 ratio Brembo master cylinder (not RCS adjustable) and they work very well....
I've got Brembo M4 calipers on my Monster and the RCS19 is perfect plus, you have the choice of 18 or 20 ratio to fine-tune it. [img] Seriously...
Sounds like dodgy 'O' rings in the female connectors in the tank as per my post re. Tom Parker? My bike stopped twice for no fuel all down to the...
748 low beam headlight responds very well to a HID conversion. I've had this on my 916 for many years, beam cut off is the same as standard but...
Presumably, 10n springs for Showa forks? If so, I have a pair doing nothing (also a pair of 9.5n). The 10's were from my '98 916 Showa forks - I...
I'm using Angel GT on the Monster, plenty of grip and no dramas. Previously had the Diablo Rosso but they wore out too quickly (despite lasting...
Indeed, I originally had a set of 45mm Termis they were supplied with an 062 'Senna' Eprom.
I've re-used old ones without any problem, also used the cheapo ebay 'mixed box for a few quid' washers - but I did have a problem with one of...
Sounds like it's running lean to me.
Not sure of the diameter, it's not accessible until I remove the covers/airbox etc. but they were standard Ducati parts from another model of...
Not familiar with 888 engine but my 916 also had 1.2mm removed from the cylinder height: 1mm from the head and 0.2mm from the base, to both...
If they work like the 916 type, they may well snap but not before your mirror does! Might help save the mounting bracket, I suppose? but they are...
On my Monster when the 6th gear was broken (as per the above pic) it was grating/rattling in every gear and would jam/release whilst pulling away...
Some years back my 916 (when it still had the steel basket) had almost 3mm of play between the basket and tangs, it was without a doubt the...
Having just had to replace the gearbox in my M900 due to the 6th gear cog losing 4 teeth, I wouldn't recommend torquing through the gearbox - the...
Yes.
Nice one. :upyeah:
