Separate names with a comma.
For an MOT, you probably don't need to do anything. They don't ride the bike or even test the speedo and so wouldn't actually know if it reads in...
Indeed, I have the 1198 Ohlins which need the larger bottom yoke (although you can bore the original +3mm) but, like the Showas they need some...
I had some 916 Showas rebuilt by Ktech with their internals, radial brake mounts and ti-nitride tubes. They could have replated the originals but...
748, unless Ohlins will be 53mm top and bottom. Ohlins are 53mm top and 56mm bottom. I don't think Ducati ever fitted Ti-nitrided Showa forks to...
aI had the switch fail on my 916, IIRC Ducati want around £30 for a new one but, as above, the Vauxhall Corsa part is compatible (just make sure...
That may help, I've just inserted it into the hole but the angle and direction it sits at makes a difference and it gets a bit hot to hold it. If...
I've got one of the digital versions and the results can vary a bit if the probe's not sitting right in the test port so you do need to take a few...
Nice, but what is it with 'Scrambler' style bikes and brown seats?...
Have you read this? BikeBoy.org - Ducati 900 ENGINES : NOT ALL CREATED EQUAL
They both use the same carbs but as you say jetting is different, 900 intake manifolds are larger bore, so no problems there. Does it have 'V2' or...
Great stuff, I'm watching. :upyeah:
Thanks for the comments John, I'd be interested in seeing your 1100 build... :upyeah:
To update an old thread; Engine now rebuilt, new big-end shells, pistons, cylinders, exhaust valves, valve guides, seats re-ground & heads...
Should all fit, you may have to adjust the linkage lengths and maybe experiment with the spline position of the lever to get the correct lever...
Remove the short lever attached to the gear change output shaft, turn it through 180 degrees and refit the linkage to the lever. Like this;...
Should be some basic maps on there, ideally you want a custom tune. I've just looked back at my notes, I had a PC3 for a while on the 916 and it...
748, 916 & 996 use the same PC3, they will need different maps of course. SP, SPS etc. models maybe different as they have a different ECU?
[IMG]
And your workshop, face, hair, clothes, lungs and inside of your nose...
At £60 it's a bargain. I polished my own on my 916 but it is dirty, messy job and it probably took me around 8 hours all in. I started on the...
