Separate names with a comma.
Take it to CJS, anywhere else is second best at best...
OK, was just a thought as I have heard of people fitting the head gaskets the wrong way round which blocks the oil return holes, meaning the oil...
Neat solution for 998. :upyeah: On older models; 916/748/996 the ECU sits there so, unfortunately won't work on them.
Not sure why you needed the heads off to check the valves & rockers? Are you sure the head gaskets are in the correct way round?
I shot blasted both side cases of my Monster engine, left both the timing and the oil 'windows' in. Used masking tape and no damage to either....
The place that powdercoated my wheels won't touch anything with bearings in it as the oil/grease can contaminate the painting process.
I'm using Pirelli Diablo Rosso 2 on my 916. They work well although not the longest lasting, rear is done in 3k miles front in around 4.5 - 5k. I...
Yes, Chris is the man to set it up. :upyeah:
Curious as to what constitutes 'light' use?... :D
You can get frame sliders that sit under the fairings, these should keep the engine off the road whilst using the bodywork to spread the weight...
But it's the piston speed that matters, not the road speed. That said, the piston looks OK but I'd still be wanting a good investigation at the...
Mine has larger air carbon tubes, I cut the fairing holes bigger to suit but they still use the original rubber gasket and clips to fix to the...
A decent carbon airbox should be no harder to install or live with than the standard version, the design is the same and will use the same rubber...
I have an Evo slave cylinder on my 916, very nice, well made part that has been working faultlessly for many years, they even have a bearing...
Even if the pistons aren't damaged, you'll need to take the head off to swap the valves. Once the head's off the cylinder will be loose and will...
Presumably (if valves damaged) then your piston(s) is beyond use anyway? If so then rather than buy new OEM pistons use these. Probably need to...
I have a stand like that and my 916 has a large hole in the bottom yoke (aftermarket Ohlins yoke as the Ducati yokes don't have a hole). I made a...
It is detachable, I removed mine to drill for a bolt to fit a temp sensor and I wanted to fit a bolt from the inside as the head's brass and not...
Don't know if this helps as it doesn't mention ST3 but it maybe the same as another model?; [IMG]
I prefer the Marchesini (but I'm biased as I have them on my 916). It also seems to me that 10 spokes might be stronger than 5? although I don't...
