Separate names with a comma.
Cat C? Surely the insurance co. would write it off for a cracked frame? Not saying it couldn't be repaired but I don't think any ins. co. would...
Not sure if the numbers shouldn't be a bit higher? but at least you've not got a silly low reading (like my Lemans that had 70psi vs 155psi) so I...
I used Chas Mortimer a few months back to transport a Guzzi that I bought in Italy, I have to say it was first class service and I would highly...
2mm isn't much, variations in ambient temperature could probably do that. When my 916 had a bore/valve guide issue it was using 1L per 1000...
I'd be doing a compression test on the cylinders. I recently had an incident with my Lemans, where suddenly it seemed a little down on power and...
Personally I'd keep the conical spacer, send back the carrier and then machine my carrier (cut the alloy off down to the steel bush) and use that...
Neither do I but mine wore so much that the sprocket machined the hub until there was barely enough to get the adjuster tool onto (then later a...
I did this back in April; buy the bike and ship it here, register with NOVA on HMRC this is to see if VAT is due and if so pay it, there was no...
Sorry to hear this. Get well soon A/C.
Yes the belt is shorter, a couple of teeth IIRC.
Lowered head uses different rocker cover and rocker pin cover gaskets, can't imagine anything else is different from a servicing point of view?...
I think all models had the plastic one originally.
Don't think it makes much difference, same cams and valve size, just that the head was shortened to fit in a Monster/ST4 frame (hits the front...
I had Ktech re-spring (9.5n) and fit the SSK valves to my 916 forks and it was a big improvement over the standard setup which was way too hard &...
Looks like an 'E' from the pic as there seems not to be the headstock adjustment and the 2-position damper mount. IIRC the 'E' also has the...
Yep, some flange and bush should see you right... :upyeah:
You beat me to it... :upyeah:
These pics should help; Old style carrier with knackered circlip groove; [IMG] New type 2-piece carrier with conical spacer to replace circlip;...
I had this happen on my 916 despite the cush drives being fine. The big circlip groove in the sprocket carrier had worn away so that the whole...
I'd be taking the airbox off to investigate properly, that way you can see everything in it's working state. Not a big job but in itself if you're...
