Separate names with a comma.
Had my bike dyno'd by Tim some years ago, actually it was organised by CJS as he did the headwork but before he had his dyno. Did a good job on...
That's what I'd do. I wouldn't knowingly fit different tyres to front/rear but I wouldn't worry about riding it that way - back tyres don't last...
Used a 1 euro cent to hold the gears/clutch on my Kid's 60cc off-roader but I wouldn't try it on a Ducati (and the coin wouldn't go in a vending...
Same forks so would fit. BTW a 1098 mudguard will fit 916 forks and also Monster (at least some variants) but the 1098 mudguard wraps around the...
Or not... :wink:
The 916cc engine's flywheel is just a weight, there is no pickup in it so you can remove it completely. I don't know if it's heavier than that on...
I think this is why the hub is wider? I run a 180 rear tyre on a Monster (same wheel & sprocket carrier as SS) and the chain touches the side of...
I'm pretty sure the hub is wider so won't fit in the swingarm.
A few years back I had a couple of valve seals work off the guide and get mashed by the rockers. The little filter was full of bits of red...
You can buy a nice bike (possibly already with a nice exhaust) for that kind of money...
Spring binding aside, depending on the type of master/slave cylinder ratio (clutch travel) I find that 38mm is the maximum I can get away with and...
I had a local engineer turn me up these for my Monster; [IMG] Got to be better than a piece of shim stock.
848 have 320mm discs, 1098/1198 have 330mm discs however fitment is the same just that the larger discs require a 5mm spacer (and 5mm longer bolt)...
Not on radial calipers...
If they really are for 748R then they would fit but I would double check the offset first as many sellers don't know the difference (witness the...
On my Marchesini wheel the lip on the right side is too small to work with a spacer - the disc would not be on the wheel, only bolted to the...
I used the normal torque but you'd probably get away with less. The magnet is stronger than the original part though.
I have 15mm discs on my 916, looked at spacers but they wouldn't work on my wheels (disc not centered by wheel, only the bolts). These should be...
I have one of these; https://tpoparts.com/cat093/index.php?route=product/product&path=1_51&product_id=11
You can do it without a stand if you do one leg at a time....
