Separate names with a comma.
My own solution is to simply drill the head right off using a 7mm/8mm (have to check what I used last time) which totally removes the head off the...
Fingers crossed for you Al, hoping to see another post soon with better news.
I know where every Duc I've ever owned is, all safely tucked up at home. :D
That's not acceptable for a precision machined item. Send them the pictures and reject them on the grounds of sub standard quality. Hopefully you...
Never assume a relay is working just because it "clicks", if the contacts inside are pitted up they may not pass a current. Quite rare but it can...
Acknowledgement is always good and when followed by the freedom to browse at leisure with the option to ask if you want something will almost...
I would have agreed with you about the height and the gap but then I looked at a picture of mine and it looks quite similar. [ATTACH]
Try www.rk-leighton.co.uk on Birmingham.
No cap on the chimney pot then.
Whenever you use this type of car park keep the payment receipt which records the date, time, vehicle reg and amount paid then when you get the...
PROPER Monster! Nice to see that there is a following and appreciation for these bikes over and above the newer offerings. Glad you like it and...
Check the large multipin loom connector, often suffers from internal corrosion.
The next major jump in electric vehicle technology may well be if a manufacturer takes on and develops aluminium - ion batteries which could well...
Thankfully the other head is OK and just needs clearances checking and adjusting. Three hours wasted trying to do it on the bike which makes the...
Done, still a bastard job but at least the clearances will be easier and quicker to check and adjust now. :upyeah:
[ATTACH]
Correct Chris, my Ingenious answer has been to lose my patience, take the head off and do it on the bench. o_O
Trying to fit a closer spring on an ST4. Made up a forked tool from an old screwdriver but can't get the leg of the spring behind the lug on the...
By up and down I take it you mean ovality ( out of round). I had much the same and found that I had to find the high spot then loosen off the...
As per Andy's advice in post 7, Daytona. Dry, warm and comfortable. :upyeah:
