Separate names with a comma.
Sad to see on news this morning that dairy farmers are pouring milk down the drain every day allegedly due to drop in demand. Maddening to see...
It's more bloody panic buying for the holiday weekend, effing madness. :mad:
Something you could probably never do on a modern bike. For all the technology you sometimes have to query if modern machines are really that much...
1998 Daimler super eight, same engine as Jag XJR. Big and heavy but reasonably quick for its size and age.
For originality I would want to keep the original rubber hoses but I believe they are no longer available from Ducati. I retro Fitted a set to my...
Took advantage of the nice weather and fitted a new alternator to replace the blown one that I took off 2 months ago. All on and charging nicely...
[ATTACH] Started putting it all back together, fitted the 70mm exhaust, Ventura rack, seat unit, cambelt covers, airbox tubes, put the rear wheel...
Something had to go more or less right. :)
Did chain and sprockets a few days go, rear was a struggle but the front came off no problems.
No, all good to go back on once I've had a clean up round the caliper and sw arm and fitted exhaust. No hurry though as it can't go out for the...
Finally got rear wheel nut off, sat there for over a minute with nut gun hammering away before it slowly started to move, didn't fully loosen...
As higgy748 says just pull the little rubber piece off between the two plastic pivot pins and push the pins out to release the whole seat unit,...
Think I might be needing one of these for the rear wheel on my 1098.
Outside of eBay you can buy from " Polished Bliss" or "Opie Oils".
Yes, salt everywhere all week and typically no rain to wash it away. Rediculous waste of money.
Had 5 or 6 goes so far of 20 - 30 seconds a time. Trouble is its indoors in the living room and the noise level is like pneumatic drill, hot to...
620 ft/lb breakaway, should be enough really. Main problem I think is that the bike has been laid up and the rear wheel probably hasn't been off...
Had another three goes at undoing the rear wheel nut with no success so knocked at next door to see if they might be out at any time soon so I can...
Brass exhaust nuts, now you'd showing your age Derek, they were always brass when I was an apprentice - many moons ago.
Steel bolts direct onto Ali head not a good idea, there's a fair chance the over time they would wreck the threads in the head. Better choice I...
