Separate names with a comma.
You need a rod to push into the connector. Once the yellow slider is pulled out the connectors are held in by friction. By carefully pushing with...
There are 59M ones on the Guzzidiag site. They should be OK for map comparison.
I invested in a Gunson Gas Analyser for CO setting. A 1/4” BSP tail fitting allows the reading to be taken from the gas take off ports before the...
No idea. Is some fettling required? Balance throttle bodies? @nelly ?
You can do it from the front if the hole exactly matches the wellnut diameter.
Deform what would be the brim (of top hat) and push through hole from back.
If it is the bolt then they are made of chocolate and round off. Try driving an oversized torx into it. When you refit make sure you copperslip...
On the Pirelli site...
Are they the manufacturers of the bolts on the 1198 fuel pump?
Might work [MEDIA]
If you are not the first owner, it looks like your stock 3215PQ58 ECU map 28641831A has been reflashed to the DP map. Only way to tell is to hook...
Looking at the diagram it looks like the 12v HT feed to the starter solenoid. If you use a meter to check continuity it should have it with the...
Had my hybrid since 5/11/20 when I filled it with petrol (£39.01 worth). Have done 725 miles since and still have 130 miles petrol range left. Get...
I think that ECU is for the 1198SP and will have both DTC and DQS in the mapping. Does it have 3220MA14 on another label?
I would complain to Ducati. If only their website allowed you to download Owner’s Handbooks. Perhaps the information may be in there?
Just got an email from BT stating they have added Eurosport 1&2 to my VIP TV package. SD on ch 412 and 413, HD on ch 435 and 436. The box...
This was previously posted. Print it off for the toolbox. https://www.ducatiforum.co.uk/threads/torque-settings.26548/
The EXBV is there to comply with noise regs. Some will say it assists performance but my opinion is it is an emissions device. By fitting this the...
Lets you junk the motor and cables. The valve can be left in place as it is held in the open position by the spring.
Check here to see what it fits https://www.healtech-electronics.com/products/ese
