Separate names with a comma.
Make sure you have the clutch plate installed correctly. The hole with the arrow/dot needs to go over the slotted spring post. Also make sure the...
Sorry, only have maps for the 45 and 50mm. The only way to go if you are running freer flowing exhausts and different cams is a custom map. You...
Hope you've got an ECU coming and not a chip. Your bike uses the IAW59M ECU. The fuelling for the 50mm should cure any lean running.
I can reflash your ECU to 96507502B PM me if interested
For the latter you would need a Fan Temperature Switch. You would need to source one for the temperature range you would want it to operate at.
Just two keys. But you need to know the dash Pin Code.
The two halves need to slide up against each other. Tighten things up slightly before inserting in the bar end
You set for Germany then :upyeah:
You are tightening the allen headed bolt down the middle?
2012 Ducati 1199 for sale in Huddersfield, West Yorkshire, Uk - Usedmotors4sale.co.uk
Are the steering stops adjustable? If they are try screwing them in further to allow the steering to turn further.
Hairdryer to soften glue and WD40 to remove residue.
Red key is for coding the clocks and ECU. Needed for installation of brand new clocks, ECU and keys. All is not lost if you don't have it as there...
It will work but your bike will run leaner.
749S - Won't start !!! | Ducati Forum
Add a pigment to the resin
Powder coat for the heat shield. Try using clear resin on the CF.
Sounds like a candidate for the secondary earth mod
Bus timetables have been published https://www.gov.im/media/1347511/service5tt.pdf
EXBV is the exhaust butterfly valve. It is found on your exhaust link pipes. They are prone to corrosion and need lubing with copper slip...
