Separate names with a comma.
If you are struggling getting a key/transponder I can supply one for £10. A good Automotive Key place should have the kit to clone your key onto...
Disabling the Lamdas, the EXBV, DQS, DTC and ICV are all possible when doing a reflash. It is also possible to change rev limit, fan cut in temp...
Are you running Iridium plugs? If so go back to using stock Avanti Race Parts - Ducati Parts and Accessories for Road and Race Motorcycles....
And as I always recommend, fit a new relay for the coils/injectors/fuel pump as they are all fed by the same relay.
You should be able to find a car key specialist who can clone your current key. They need to use a T5 transponder. If you were near Leeds I could...
Check your regulator/rectifier with a meter
Before the bling, pay to have the suspension set up for YOU.
Try some Loctite specialist adhesive Loctite Plastics Bonding System from Loctite Adhesives
Here's a document that explains the approval number. It would appear that the 06 at the end is an optional element relating to the number of...
I've got a 999 and 1198s. Comfort wise the 999 has it. The 1198 puts more pressure on the wrists. Where you seem to sit in the 999, the 1198 is...
Sorry, no idea how to confirm. As I understand it the Upmap downloads the DP map to the ECU and uploads the stock map to itself. To be used with...
Not seen that on a dash before. I will send an email to my contact in OZ and see what he says. If the scrolling message says SBK 1098 TSE then...
Jim Redmond at Bikenders might be able to help 01708 455530
It needs to be new or have had the DP Upmap downloaded off the bike it was originally used with.
I would price up a new dash at the main dealers and then see if this is a bargain Strumentazione per Ducati 848- 1098 -1098 R Nuovo | eBay For...
Pipe length must be important as Ducati make the link pipes for each cylinder to be of equivalent length by making them volumetrically equal.
1000 to 1100 rpm. The RPM is achieved via correct setting of the CO using diagnostic and using the bypass screws on the throttle body. Section D4...
Give Dynojet UK a call http://www.dynojet.co.uk/index.php/contact
If you put a couple of washers between the covers and the casing it will allow the clutch dust to escape. I run the clutch cover like this on my...
Don't forget that the horizontal link pipe has a catalytic converter built into it. This would need removing or the whole pipe replacing with a...
