Separate names with a comma.
That would suggest it may be a coil driver issue with the ECU. The coils appear to be OK as the fault has not switched cylinders. If you pick up...
The numbers on the labels plus electronic data via JPDiag help me identify the bike/system the ECU is for. For quite a while I have been working...
When I did the firmware on mine I just used a mini usb cable and built a 9v connector. I have some 9v connectors that I built for £5 (inc p&p)....
You can run the cans with the stock ECU. It will run lean but you will be able to hear your Termis for the first time. Update - the ECU supplied...
They are the bolts that hold the ECU to the back of the battery box. On the other side one of the bolts holds an earth lead to the heat sink of...
Here's the original...
Has anyone found a way to report an individual instead of the item to ebay
Personally, I would. You could try adding some more fibre washers to the fixing screws to add extra insulation.
It's designed to stick onto bodywork etc to reflect heat away. The heat shields are getting direct heat from the pipes and it is probably the...
Just put them in any way. Look out for the convex plate. This has a dot painted on one of the splines. If you have a centre punch then redo the...
2013 Ducati 1199 Panigale ABS, Red, low mileage motorbike for sale
Hacked account in States. Bike has a yellow reflective number plate fitted. UK bike probably.
The Michelin site states they are not compatible with the 1098. I also checked and it is not compatible with the ST4 & ST4s but is with the ST3....
Can't make it this weekend :( Maybe Cock O' North end of July
That's a shame, cos that is the cheap fixes out of the way. Can you swap your coils over from horizontal to vertical. See if the error changes...
Ordered :upyeah:
All the ECU does is supply an earth trigger to the relay. It would be a simple job to check the relay is correctly latching using diagnostic...
Whereabouts was the loom damage? This may be a problem for others. Any photos?
A narrow drift would be better. Just knock it out the bearing.
The one that causes the most problems is the coil/injector/pump. This one relay feeds 3 systems. Even though it may look OK, replace it. They are...
