Separate names with a comma.
Just what is needed to run JPDiag Free Diagnostic Software | Ducati Forum Don't use the drivers on the CD though.
I should charge ;) Next time you see Help for Heroes collecting put a quid in :upyeah:
My first suspect would be the earth fly lead. Unfortunately, to get to it you need to take the battery box off and remove the silver heat shield...
Have you had the ECU out or unbolted? There is a little earth fly lead that goes under one of the bolts that secure the ECU to the battery box. It...
Keep holding the button down. You will then see 'Error' and a number code (eg 10.2, 34.0)
Post the error code here. To retrieve press and hold down the left switch on the dash. Whilst doing this switch ignition on. Keep holding the...
Found the instruction sheet pastelink.me | the easiest way to share files online
You only need to remove the hanger bolt on each side and replace with the extenders.
Have you got the long hexagonal extenders that replace the exhaust hanger bolts? I have one fitted on my 1198 with Akras at the moment. Once the...
As always, we have to pay through the nose :(
Pre - order (states due May) £33.88 inc P&P Tamiya - Ducati 1199 Panigale S model from Grand Prix Models
If you Google 'Motorcycle Track Day Regulations' some state leather boots must be worn with no definition of boot. Others say boots must be worn...
The colours on the sensor side are different. Ducati do not list these as they're are from the manufacturer. You have to match the wires up with...
As Nelson says, it should be easy to test. The speed sensor is a 3 wire Hall Effect Sensor. The wires into it are Bn/R - to ECU PIN 22 Engine G -...
JP found that the IAW59M's needed a slightly longer initiation time to connect. As you have found, sometimes the ECU's will connect on either.
1. Did you install JPDiag correctly. Did you click on the computer icon on the second screen of the installation and then follow the prompts? 2....
No probs
If you send me the ECU I reflashed then I will fit it to my own 999. Test that it runs with the bike. Code the ECU to my red key and then...
OK. I have flashed an IAW59M to a map for 57mm system for the 999S. Immo has been disabled. If you can throw it open to the forum then I will...
Just checked your PM's and the 749 ECU is a 2003 (IAW59M) so my lead plan wouldn't work. I can flash a DP map to an IAW59M ECU and disable the...
