Separate names with a comma.
Have run your problem past a contact of mine who tunes Ducatis. What is the cranking speed of the engine like? If it is too slow it could cause...
I have just used a Spanish Motorcycle clothing retailer to purchase a new Alpinestars Orbiter suit. The cheapest price I could find in the UK was...
1st April !!!!!!!!
The sale is on behalf of the widow of the former owner.
I wouldn't take the ECU connectors apart. I would check the pin continuity with a meter and with reference to the wiring diagram
2003 999 with under 1000 miles http://www.ducati-upnorth.com/forum/showthread.php?20365-2003-999-with-under-1000-miles...
There's a dash on Gumtree for £80 at the moment http://www.gumtree.com/p/cars-vans-motorbikes/ducati-999749-speedo/1050738282
The DP ECU disables the lambdas but the EXBV is still operative. You can test by disconnecting the EXBV motor connector (which is behind the...
Disable in ECU, consign motor and cables to parts bin. Sorted.
You can buy it on Amazon. It's what you do with the information. http://www.bbc.co.uk/news/uk-26756196
Good sized tank bag
This might do the job...
Spring spire clip. M6 I think.
Common problem on older 749/999's Two things I would recommend 1. New Coil/Injector/Fuel Pump relay 2. Secondary earth lead Was covered in this...
If the lambdas are disabled in the ECU then you will not get an EOBD. With my DP ECU I removed the lambdas so I don't know if they will be...
You can't adjust CO when the lambdas are active. With the DP ECU the Lambdas are disabled and you will be able to adjust the CO. Get yourself some...
You still got the lambdas attached?
The setting is done with engine running and engine temp at 40 Don't know what point difference each increase/decrease makes but it can be...
It's a little more complex than that. The code number is held in Hexidecimal Code and to retrieve it requires interrogation of both the ECU and...
In JPDiag you have to press TEST first and within 5 seconds press confirm. The read CO does nothing. I read the CO at the manifold using a...