Separate names with a comma.
Yes - part number 979000165. They should fit.
+1 on Optimate
The motor is now redundant because it is disabled in the ECU. Just take it all off except the sprung pulley. The valve is held fully open by the...
Have you isnatlled the motor and cables? To keep the valve in the open position just disconnect the cables from the EXBV and the spring will keep...
Sounds like he has done the full mashings with the Lambdas and EXBV. You just need to determine fully open and lock the valve there. If you...
If you disconnect the cables and leave the spring on the EXBV pulley then that is the fully open position. So the default position is fully open....
"La mierda ocurre"
Always use one to suppliment my Navigation. Have my route preplanned in note form (road numbers and towns) in the tank bag map pocket and listen...
If you've not had the clocks off before they are just push fit into two rubber grommits. You just firmly pull them towards you. The connector is...
They'll just allow 2.0L Ducatis if this continues
NB - that's a mono system http://ducatiforum.co.uk/f2/cheap-999-mono-ventura-rack-gumtree-8644/
Posed the question to one of our Gurus on another forum "Strange fault, as the rev signal is generated at the ECU then by CAN to the clocks as...
I've just been looking at the wiring diagram for the bike and can find no output from ECU pin 9 to the dash on it. Does anybody know if the output...
On the 749/999 the dash gets the tacho pulse from the ECU. As it goes away when warm I wonder if you have a dry solder joint or broken cable...
Think you're right and you'd probably lose the pillion seat.
Here's how the system fits [ATTACH] [ATTACH]
It bolts onto the rear subframe mounting for the mono. Whether it would fit the biposto I do not know. I have this system for my own 999 mono and...
Came across this on Gumtree Ducati 999 / 749 luggage rack in Cardiff | Motorbike Accessories & Styling for Sale | Gumtree.com
Check the Ventura site out Ducati 999 Biposto motorcycle luggage rack | Ventura MCA
I see you've got them off the bike. An ideal time to get rid. Yes the blanks are 18mm x 1.5
