Separate names with a comma.
They’re still available from Ducati. Don’t recall them being that expensive.
Yes, they’re easy to do once the shift arm is off. It’s not a unique system to749. If you can find any manual bar Panigale, it’s basically the...
Do them both. They’ve been updated since the original part. About 7 quid for the pair iirc.
I’m not saying don’t do it, just that there’s a lot of info come out in this thread, and it just seems to be getting bogged down. I personally...
Tyre supplies are getting very thin. I’ve done loads this week alone and requests for more keep coming nearly every day. Prices are going up...
I can’t recall the number, but I set a 916 up with the old deflection tool, then measured with the frequency tool, and it wasn’t 110hz. Next time...
They had to make room for the suspension points on the monster and ST frames to avoid retooling ;o) Original head design wouldn't fit.
Treat it the same as a conventional system, but yes, you’ll need to pump more fluid through. Providing you don’t take air in, then it should go...
Well, it was kind of a sprag issue..... it wasn’t fastened to the crank, neither was the flywheel or alternator rotor. New nut, thread lock and it...
Iirc, the S ran the T1 cams from the SPS. It wasn’t spec’d with Ti rods, but some of the earlier ones were fitted with them from the SPS leftovers...
Yes, I get you. I’ve done similar in the past but in the picture, the belt doesn’t look to be deflecting. I’d double check with a steel rule...
OK. I see what that’s doing.... kind of. The factory tool when used, measures 5mm deflection at that point. Are you using the key to measure...
The plugs in your DVT are twin electrode type. There’s no adjustment on them as such as the earth legs are too small to bend safely. Once the gap...
When you say “Allen key method” for adjusting them, what do you mean? The Allen key method I know is for 2V bikes. The lips on the idler pulleys...
Don't use that for any form of supply. It's intended for just powering the diagnostics and as it turned out, they found out the could use it to...
Panigale is very different selector mech. There's no adjustment or parts to slip out of alignment. If it's not changing smoothly and returning,...
https://www.ebay.co.uk/itm/Ducati-900-ss-1998-2008-Throttle-Injection-Bodies/361500492157?fits=UKM_Submodel%3ASS%7CUKM_Make%3ADucati&_trkparms=ispr...
Might it be possible to pick up a set of throttle bodies for ST2, SSie etc. they don't usually fetch much, especially something like 7500SSie....
Sorry. Yes, the 916 are side fed. I knew I had green ones, but no top feed i'm afraid.
I might have some lying around in the shop. Let me have a look. I think they also went in 748/916?
