Separate names with a comma.
I’d be careful drilling it.... there a good chance you’re going to land brass in the sump and there’s a magnet on it which is going to end up...
Torx is easiest get out. They’re brass not ally, so if you resort to hitting it to get it out, bear in mind it’ll shave off easier than ally.
Mudguard edge rubbing on them.
I've probably had worse ;) £180 delivered? It's a £300 seat when new.
No worries. I need to sit down and figure out some prices or make me an offer?
There's an DP exhaust, head light bezel, clock bezel, flat track bar kit (lower alloy bars compared to stock Icon), Italia independent seat...
Corse 848 was a 2012/13 bike. 2008 bike will be straight 848, pre EVO.
No worries. yes, I'm selling them Just haven't got around to it. There's a shelf full of Scrambler bits :)
I've still got my old set in the workshop Mark. You're welcome to have a look. I'd say they're a little heavier, but not as I noticed.
You really need to get the neutral light lit on the dash to rule the side stand interlock out. Is the clutch switch in place?
If you have no neutral light n the dash, the electrics don't know it's in neutral. Although the switch may well work, but if the signal is lost,...
Because of the support issues, I've moved my PC's over to WIN 10. No dramas really, and it is noticeably quicker especially to boot up. It's just...
The Evo 2 SW is available but only for for track use/slicks. No good for road really. Not heard if the earlier bikes will get the 2020 update or...
I’ve fitted Osram nightbreaker laser into a few bikes with good results. Not used LED as I’d be concerned about the focus of the light. Don’t use...
You’ll only get to the bottom of it after reading the ecu out and finding what’s lighting the warning up. There are so many error codes on these...
Reduced to £6000! no offers
Whatever you go for, make sure the front has a speedo drive. None of the newer oem stuff has it.
You wish... Showa I’m afraid.
I've got a brand new, still boxed rear shock if it's any interest. £450 delivered.
It was raised by a faulty batch of stands, not a design issue. No change in part number needed. Not all bikes are affected, only the ones fitted...
