Separate names with a comma.
The pin is for the centre stand spring. If yours is a sport and didn’t come with the stand, it won’t be there. If you need one to fit the stand,...
Motul 7100 or 300v. 15/50 is the right grade 300v has the edge on performance but is a little more expensive. Either will suit road use, but for...
Yes. There’s a clip fits into the bar and the switch gear slides over and locks in it. You depress the clip with the tool and the switch slides...
Yes, iirc it’s the underside from the center of the bars outwards. Take your time to feel the retainer compress. It’s possible the blade can go...
The switchgear has that much packed into it now that it's not designed to be split, hence the concealed clip fitting that secures it. The tool is...
Wet climate? Are you referring to the wet boiling point? There’s two figures quoted for the fluids. The dry is for brand new fluid. The fluids...
Factory tool is a little under 50 quid and yes, if you want one you can order them. I wouldn’t use anything other than aluminium tbh. Mild steel,...
The factory tool is aluminium. A steel drift flares the end of the axle and as it's a tolerance fit in the bearings and once flared, it ain't...
The reservoir will have no effect on the braking efficiency. Talk to you dealer about your rear brake issue. There has been a technical bulletin...
It's a casting line, where the cores have been removed. The motor I have here is the same. The line runs down thru the inlet tract.
Looks quite normal to what I’ve e seen tbh. Just built a 1098 motor with similar build up. No issues with valve sealing or stem seals. Could be...
They do it for checking MOT & tax details to. Just double check it’s a .gov site you’re logging into.
Monster 797 for sale. This has been our courtesy bike and has covered just 1749 miles. '19 plate with Ducati warranty until March 2021. Great...
BUMP :) The manifold/header kits are now obsolete so this is a rare chance to buy new.
A lot depends upon where the hub is positioned in the s/arm as the caliper hanger follows the eccentric. Slacken the chain off and unhook it off...
Best mod I did to the 1098 GWS
I haven't seen the Maxton kit, but the Showa BPF forks are a pain to convert. The preload is at the bottom of the fork, with both damping controls...
The stick coils use a 12V permanent feed, earth and trigger/signal. The older coils had a 12V permanent feed with the trigger being fired by the...
Yep.... it's on the list. Only issued today in the UK, so give you're dealer a bit of breathing space to get the parts sorted ;)
One of the best! A very brave soul. God bless
