Separate names with a comma.
It'll work with all the original parts. You can always switch out the hub at a later date for a slipper unit and that'd work fine to. There's the...
What Andy said. No downsides tbh, even the cost is comparable. EVR and Sigma are also worthy options.
Recalls and technical updates are different things. Generally a recall will be safety related or critical to the bikes performance. Only recalls...
Can't see it going back to the early gen' bikes John, but the parts aren't much in the way of cost. Does the trick though...
As said above, bike comes with both options as standard. I'd get back on to the dealer who sold it you.
Since Brembo switched to using plastic reservoir caps, they've been prone to weeping fluid, tightening them makes it worse as the cap distorts....
Caliper has to come off, as does the wheel. Not difficult as such, but you need to get the wheel off and back on/torqued up.
The darker ones were OEM at that time, then they switched to silver. You can't get the older ones any longer. If you order off the old part...
Couple of storage heaters would do the job. Charge up at night if you have economy 7 then leave on low to frost protect. Turn them up if you're...
Ok. I see what you mean. The housings are handed and maybe have been swapped at some point? I don't know. There is definitely enough oil getting...
There's an oil way machined into the bearing carrier. Doesn't matter in truth where the holes are, the oil travels around the full circumference...
Saw them at the NEC. They look really good pieces of kit. Talking to the HEL guys, they should be appearing on some top line race bikes soon....
Yes, Chris Steadman
No, at least not with the Ducati equipment. The idle is ecu controlled. A remap with new idle speed targets would do it. CJS could probably do a...
The silver fastener is a rivet, not a screw
Check the connection to TPS for the Tune boy. No experience with them, but power commanders can cause this when the connection to TPS signal wire...
Before pushing the pistons back, remove most of the brake fluid from the reservoir and cover it to avoid splashing fluid over the bike. Push the...
As FE said, stock front is ally anyhow. Get a fresh oem one? I’ve seen ally rear nuts split, on more than one occasion, and wouldn’t use them, not...
It's a cracking little bike. I had some down time and took it out for the day and was really impressed with it tbh. It feels "grown up", far from...
Here’s one I took earlier [ATTACH]
