Separate names with a comma.
Renthal for me. Used them on several bikes for years now. Once you have the carrier, you just need to change the chain wheel when the time comes....
Yep, but not seen any for years now. Came as a kit with the levers to. Looks like you have the original brake lever with the kit to :) should have...
Advertised it a while back. I've still got it https://www.ducatiforum.co.uk/threads/ducati-performance-848-1098-1198-30-off.54839/
Think I have the DP kit for the 848 which is the stock 1098 part. I’ll have a look tomorrow
As a subscriber.... probably ;)
That's the crank for the 848 and 848 SF but it's not listed against the HYM. May fit, but it could be balanced to suit the 848 rods/pistons. The...
Nope. different part number... may fit, but neither of the numbers listed against the 848 match the HYM ones. Could just be a change in...
2010 part number has been superceded 3 times up to the 2012 bike. also shared with the Monster EVO 2012/13. 14621691A was the first, then...
I can check tomorrow for ya. Reconditioning depends on how much damage there is. I’d wait til you have a diagnosis off John first.
The bearings you've in mind are the mains. I think they'd be ok. The big ends are the plain bearings on the crank/conrod. Either way, it'd be a...
My gut feeling is shot has either blocked the oil feed to the big ends or it's got through and worn them. Hopefully John will sort it. It'll be in...
I've not found a connector for the later type Derek. Had a couple go bad and cut out and fit a AMP type connector to the loom/solenoid. It's only...
Seen it before on a couple of occasions. Always tighten the pinch bolts down 1-2-1-2 Only other thing is to check the arm hasn’t cracked thru...
That’s shit luck how were the cases prep’d prior to painting? First thing that springs to mind, is if they were blasted, then the oil gallery in...
Ducati did a kit for the 848 which included everything needed, even a slipper clutch, and iirc fits the GT to. Was reasonable money to but is no...
The kit is still available. It covers the exhaust heat shield and the rear cylinder covers. Part number is 69926691A for standard bike. There's...
Price now reduced to £8250 following a sale falling thru. This bike needs to go to a new home asap. The bike will still be in our workshop for a...
I prefer to use Sprint now as they're dry. I've used K&N for years, still do on some jobs, but the later gen bikes are using sensors, MAP and MAF...
If a battery had gone off, there'd be bits of bodywork missing etc. The guy had said he'd pulled up and smelt burning, looked down and saw the...
The later fuel sensors require a firmware update to two of the ecu’s. If you were on your original 2010 sender, then without a doubt it will need...
