Separate names with a comma.
The original part numbers are indeed obsolete and have been superseded to the part numbers off the 1299. Both are available as far as I can see,...
Personally, I wouldn't do too much. The tank is sitting how it wants to sit and bending brackets and mounts will put stresses in to the assembly....
Your bike is running the later, fatter air box seal (which is a good thing).... The frame and tank were never altered from the original bikes...
Not sure if I'm honest. Haven't any yet as there aren't many tipping 15k that I've come across so haven't had the new belts to hand. Parts seem to...
Yep. It's 5 years or 15k. Scrambler and the new 797 (same engine) use a new belt. It's not the old 696/796 belt which is still 2 years.
I believe so, unless they were imported. I have a customer with one that came over from US. Had me scratching my head at first. US vins are quite...
The S was, iirc, the SPS variant for the US. The T1 cams were too dirty for US emissions regs so the S was created with BP cams in what was...
Rev limiter?
I can only confirm what bolds said earlier. There is new instruction from the factory on this. I've replaced a couple with some success but it's...
80 ish generally optimum running from what I know. This ties in with trims being turned off in the fuel maps etc. As a rule, this is fine and all...
I use either the Agip or Motul. Nowt wrong with either. Motul is definitely easier to get a hold of. Motul do/did a coolant additive that helps...
Cats are in the silencers. Remus is a good option. Looks good and sounds sweet. Not too much £'s either.
Gen 1 ECU won't run on your bike. The stock ECU will need flashing or, as mentioned use an UPMAP key "if" you can get one. I use Rexxer and have...
Injection relay.. Check for pump priming. It supplies 12V to pump, coils and injectors. Lives on LHS of battery tray
There should be two in the Termi pipe work.
Yes. Bit of a pain to get to, but it's the only way.
ST4 has a throttle stop screw. RHS of the front throttle where the cable hooks up. Just give it a tweak.
I have some kits in stock. Pm us and I'll pass on my details.
Not directly. I use either JHP or CJS. Both good.
Agree with Rman. Get it set up properly with a decent EPROM first. I've seen loads of power commanders sold and tuned to sort issues out that...
