Separate names with a comma.
It sold very quickly. Been on the waiting lists at three shops with no luck then by chance was wandering round Meadowhall and Goldsmiths had one....
Tracked this down a month or so ago. Limited run Tag Muhammed Ali. Very happy [ATTACH]
There are two kits coming out. The first is a "rearset" arrangement working off the stock position. Looks like they give a further 40mm closer to...
The YB16 is a good battery, albeit old tech, for CCA. The lead upgrade is a must have imo. I'd try that set up first before looking at gearing...
SD are a decent outfit. I've known Sean for a good many years now. The red 749S they have in has been one of my customers bike for a while. Either...
The fast idle cable can move/sit awkwardly on or around a flat part of the headlight housing, down the LHS of the headstock. Usually causes idle...
Ducati direct. Your dealer can order them.
Yes Steve. I can do all the recall and warranty work.
Check/adjust front suspension settings... sounds like compression damping is out
It's been the way since time began..... It's seems better of late with the later slave cylinders... Even better with the cable clutches There are...
It's a measurement across all plates. Stack height is far more relevant when using a slipper clutch. For the stock clutch, there is a wear limit...
The later bikes, 996 and 748 switched over to the YT12B-BS battery. The battery will fit fine. Leave the cables alone and just fit the battery...
Rider is right..... belts have to come off to check valve clearances properly anyhow.
Over tightened pinch bolt? Not seen any split nuts before, but axles getting oval is still pretty common. See a lot of damaged plating and...
I've just been over to the factory and got to go watch the DRE Enduro school in action. It's a big old bus, but with the tuition given it was...
Direct from Ducati it's £172. The parts are supplied as a pair under one part number.
748 engine doesn't run the P8.... You can keep the stock 1.6M and change the chip...job done. P8 runs two flywheel sensors among other things and...
Moto Rapido in Winchester
I've fLashed a couple recently with the Rexxer and had decent results. Since Ducati have been doing the Termis again, but not supplying the ECU,...
Still listed......Part number is 42540041B. Same as 916/996 etc.
