Separate names with a comma.
Finally got around to finishing the panigale valve adjustment. Only needed to fit new collects to get the clearance back into spec.
Only problem with mine in 3 years has been the throttle sensor. Still love it.
There is a tale about a Formula 1 driver in the 60s who used a lady with a parasol as a braker marker into a high speed corner. Unfortunately she...
Definitely best with the exhaust off unfortunately, otherwise you get sealant everywhere as you try and get the cover on.
Doing the inlet valve shims on my 1199. It's a bit convoluted :mad: [ATTACH]
I took the pipe off as you can't really get the cover on and off with it fitted. Seen to remember taking off the RH side footrest etc, obviously...
It was the second one :joy::joy::(
About 4-5 hours on the second one
If you see any signs of the drive gears flaking then take off the sump pan for a good clean.
It was well over 6" in half the lawn, and was cut just before winter set in.
You will get black flagged at almeria for that can. Too quiet :p
Cut the grass. It's not even mid February yet FFS.
Is it a desmo, or the same engine as a multi with normal style valve train?
It's basically just a nipple that is tapped into the telltale hole for the pump and then leads any leak into the belly pan. It's a ducati part, I...
Possibly that it is relatively easy to access, and you need to remove the bottom exhaust pipe to get the case off. You can also get an updated...
[ATTACH]
If you have a bit of spanner time it's fairly easy. Presume thexR has steel gears.
Booked. Let's hope I don't have as many bits falling off as last time....
Mine never recovered after a track day off, eventually had it taken out. Which was interesting to watch.
