Separate names with a comma.
My panigale this time. :mad::mad::mad::mad::mad: [ATTACH]
Be careful removing the cam end covers as they support the camshafts. Other ones are easy enough but you may need a puller to get the clutch cover...
Booked a few noisy days at donington
Finished the rgv250 with ssa conversion. Two track days booked for it so far
Rebuilt a gt250 oil pump. Strange little thing.
There should be a rubber grommet inside, which is compressed by the knurled fitting. Possibly this needs changing if the fitting has been screwed...
Went to High Force last night for a 'Dark Sky' stargazing experience. Cloudy at times otherwise very nice. And interesting being at the bottom of...
My local Aprilia/ktm dealer have it right. Let you wander round for a bit, then approach you and ask if they can help at the moment, if not then...
Had two new front tyres fitted to The Car That Shall Not Be Named (or the sports car guys will get all sarcastic). Amazing the difference in...
I dismantle most of the fairing :(
I found shining a torch into the filler neck lights up the coolant so you can see it in the stupid level gauge
Ethanol has a less calorific value per kilo so your consumption will drop a bit as you have to put more fuel in to get the same power out of the...
Went to see the Foo Fighters horror spoof last night. Surreal. Especially when Lionel Ritchie appeared...
You have a PM...
The sticker on the other side should have the arrow at the other end of marchesini
Guess the rim stickers are on the wrong sides of the rear wheel...
You will need your belly pan, front cylinder exhaust pipe and silencer, rh footrest and bracket, ecu and wiring supports removing or moving to...
Hopefully we have the correctly programmed unit. Bike is fitted with corse rearsets running race shift with the shaft arm pointing down. Took a...
Not sure on a 959, but on an 1199 there is a fair amount needs to be removed (including part of the exhaust) to access the side casing which will...
I've fitted a BSD unit as well, but need to get it on the dyno yet to try and set it up. What problems have you got?
