Separate names with a comma.
Have you tried a pressure gauge in the pressure switch hole?
Leather sliders feel better to me. And if you follow someone round the long right hander at Mallory who is using them, you get a lovely smell of...
They didnt come as standard with a biposto subframe....
I believe 1199/1299 have decompressors.
These bikes are all around 20 years old, I would be more worried how it has been treated since then. If it was my bike that was being sold, then...
Nothing wrong with the bike being imported by Baines. My 996 was imported by them in 99, and it was an official UK bike fitted from the factory...
It fits with few problems, you need the inlet rubbers to go with it, and air box with different rocker covers. However unless you have a late...
I've done around the same mods as you plus 748r injection and run a 50mm system with no apparent detriment. 149rwhp 996.
You will not get any performance improvement out of super unleaded unless the engine is tuned to suit. My car however runs knock sensors so while...
Only the rods are titanium, not the cams. Things can get expensive if you remove the bottom end bolts as they are 'supposed' to be two use only
Dont forget to get a couple of spare spider springs......
Run race style shift on all my bikes, doesn't seem right when I ride a 'normal' shift.
Could be an 'R' style airbox fitted with standard injectors. Would be interesting to see the type of frame cross brace under the airbox
It was certainly interesting watching it develop and a lot easier to use when I used the tunnel this week
Seen it happen before. Hopefully it's your problem, give the connections a good spray with electrical cleaner.
I have to say I didn't have any problems with wind blast at legal speeds, but hypothetically at about the ton you might possibly get bounced...
I did this on mine, but not as much as you want to. You may require oversize cam pulleys to get the belt tension correct.
Cheers, so the old carby R1 would have no problems as our blows 95 static, but I guess I'm screwed with the 996....
Sounds like you guys had a great time, would be grateful if you could say what the noise limit was and how it was measured. Was at cadwell last...
https://m.facebook.com/story.php?story_fbid=411384896360145&id=296577314507
