Separate names with a comma.
They have had the rear return section removed so acting as straight through essentially unbaffled pipes. Combined with the carbs and open airbox...
Does the stuff on the screen stick to the magnet?
I would not say that the symptoms you describe are typical of a gallery plug backing out. Before pulling it apart I would do a compression test...
Hi all, I'm looking for a pair of standard wheels suitable for a late model 900 SSie please. Cosmetics / bearing condition etc. unimportant but...
I would check the spring rate before trying anything else - it could be that it's a spring rated for rider plus pillion, which would feel much...
I get any Arai vents, replacement pads etc that I need from Motostorm in Italy. Wide range of parts includng those Arai dealers over here won't...
I have, and I'm not.
You can see the gallery plug without endoscopes or mirrors. (though a torch will help!) Just look down horiz cylinder port at the crank in the...
It it were mine I would give the bores the lightest possible hone to help the rings bed in properly and be sure of a good oil film and good...
The crack is just starting but definitely better to catch now before it grows. There is a lot of force put through the headstock under hard...
More Friesian perhaps? I'll be off then...
Shhhhh - VAG must never find out !
I've found it's actually a very reliable road bike (for a high performance two stroke) if left totally standard, used with top quality oil, and...
Be a responsible citizen - Don't spoil the enjoyment of the Ducati symphony by your neighbours - wear earplugs !
42Nm
Yes it is. Might be worth warming the area around it to reduce the torque needed to free the plug.
PM sent
There is no silicone in WD40.
There is a Cagiva basket case / bitsa for sale on eBay... 132060656034
Just ordered a set for the '93 900SS from Exige this morning and they are already in the post and I've got the tracking number... On Christmas...
