Separate names with a comma.
Can’t tell from photo,s! Can’t see why it would not .Let me know how you want payment and I will pay you. Thank you.
Hi can be fitted without radiator guard? All fixings with it? If so will take it. Thanks
Heat and shock. Heat up the threaded side with hot air gun. If you can hammer a slightly bigger torx bit into the head for a tight fit all the...
Had same problem . Found noise cancelling headphones Bose Q20 works really well. Takes out all the thrummy base tones and leaves a very acceptable...
Speedy cables restore car gauges. Website seems to say gauges in general. Might be worth a call.
Noticed someone on eBay doing a complete service service for the sach shock for £170.
Have got many spares from motorapido and service has been good.
My thinking is if you supply voltage From a battery and they heat up then probably fault lies elsewhere. If it does not then you need to get new...
Have seen plenty of posts that would indicate they are a common failure. Can you supply the grips with voltage to see if they work?
Cooling fan predominantly come on 97-100 go of 102 ish. Most likely 3 of those thing are one issue. Erratic tick and running rich, Hot and...
Heath Robinson would be proud. Did it come up with a fault code?
I put a conversion kit ( just a sleeve with the taper for mop which slips over shaft and is held on with grub screw) on a 350w bench grinder and...
Have collection of screens . Just tell me where to chop.
Pretty sure that would do it . You can get a daylight MOT. Just ask them to verify.
Schubert C3. Have roundish bonce. Fits well and quite quiet for flip front. Shoei are similar. Didn’t fit me as well as Schu.
Might be an idea to have a look at the clutch anyway check for operation and wear and tear. Can’t see synthetic oil causing that sort of problem.
Reset mine at 15000 with no problem with same thing. Have seen other posts where it has worked the first time then successive attempts have...
Weld a nut on it .lotsa heat, should be good.
Pretty easy to do. Mark belts before taking off. Transfer marks onto new belts. Stick them on . Worst part is the amount of stuff you have to take...
Mine did same . Got mine powder coated. Was a good match.
