Separate names with a comma.
I am replacing the rear pads on my 2013 multi. I know the rear brakes are extremely weak, so I was looking for a more aggressive pad to try and...
unless they have changed the basic construction design from my 2013 model, then its an easy fix. the black part you have scratched is held to the...
I found that the pannier is sticking from the bottom where it is secured by the rubbers that go on the bottom of the rear foot rest. I would smear...
smear a little silicon grease on the rubber stops that fit on the bottom of the rear foot hanger. The pannier will then slide into place with no...
Took a 1260 for a test ride and after 5 minutes decided to keep my twin spark model. the seat was so uncomfortable. How can they get it so wrong?
Z8 , tried them all, and this so far is the best
Sold my crosstourer for my multi. First Ducati and the longest I've owned a bike (4 years). The crosstourer is too heavy and the front suspension...
I am looking to get my shock seals replaced. Can anyone recommend someone they have used and were pleased with the result. Thanks
If its a 1200 (not the 1260) then £11000 from a dealer looks about right. They do depreciate at a heavy rate. Check out the dealer prices on...
Slack or worn chain ?
Serious Jockin, I turn it off. Jeremy Vine : predictable and boring. The BBC cant see the obvious of how out of touch they are. Yet I always...
If you have a pre DVT model, you will be shocked by how bad the seat is on the 1260. It was complained about when the DVT came out. And they have...
I did mention this to the dealer when I handed the bike back. He confirmed that its much smoother in sport compared to the testastretta engine in...
I had a test ride in a multi 1260s today. I currently have a 1200abs 2013. I was thinking that as this model is two incarnations after my model ,...
BMW 1600 GT, Honda Goldwing, BMW RT
Its a ride in ride out deal (from Pirelli). I asked if he would post them to Glasgow. "No problem, as long as you don't shout about it " And that...
check the side stand switch with the engine running in gear. (on a stand). shake the wiring on the switch and check the connector is pushed home.
buy a front paddock stand on ebay for £15
top seal and cap. common problem
