Separate names with a comma.
[ATTACH] Cheers Gaz
[ATTACH] Will measure up best I can but it's not just od I'd and length. There are various steps and shoulders. Cheers Gaz
MonkeyDog, I recall reading (I have not done it) if you fit the oil cooler higher you will not be able to fit the brace (item 27) if you stay with...
Yes, correct I knew there would be something. Bike in bits so wasn't thinking about that. Cheers Gaz
While waiting for a closing shim and closing shim measuring tool to arrive - I had a theory. I thought "you have the valve, you have the shim, you...
Yes it is difficult. I think unless there was a definate difference in colour which is the oil staining on the exposed outer top part I would have...
Thanks both for that, that has given me a bit more of an idea. I think Ive seen it mentioned before that the indentation is more pronounced on...
There seems to be a difference of opinion on reusing collets if they are ok or installing new with regards to bedding in and valve clearance. I...
Keith, Yes I have a large thick flat washer, I will take the cams out and pull them in with a "G" clamp over the head until the washer contacts...
I think I knew the answer really. Pressing the seal in flush gives 2.5 / 2.7mm to start of chamfer. [ATTACH] [ATTACH] I was about 2mm in so for...
Basically, have I knocked the seal in too far. There is a bigish taper on the bush and think the seal is too far in and not sealing on cylindrical...
Took the plunge to pull the rockers out and check the shims and side clearance. Ended up with about 0.6 give or take a bit on both sides so glad I...
From memory the rear wheel (on a SS) had a cone washer spacer. Make sure this is the right way round I think its cone inwards. It may or may not...
Yes thanks for replies. Sorry should have check continuity, I did think about it but thought it would not work because the pluger was touching the...
If it had 2 wires I would guess you could do a continuity test across the 2 wires and press the end in to check, but not sure what to do with one...
The switch is a spare and off the bike - just wanted to check it and make sure it was working. Cheers Gaz
Hi Derek Its one of these. https://www.stein-dinse.biz/advanced_search_result.php?inc_subcat=1&keywords=037012590&x=0&y=0&categories_id= Cheers Gaz
First Iam NO electrician I have a side stand switch with just one wire on it. Could anyone tell me how to check it is working / making a contect....
Sorry, yes its a 904cc 2 valve. Did not say in the title of thread, but I am talking about the closing rocker. I think you are correct about the...
As mentioned before this reno is taking a while. I installed the Horz cyl head closing rocker arms a while ago, and have just done the Vertical...
