Separate names with a comma.
Is that the condition where you throw money into a bottomless pit. I just unwrapped some parts from newspaper I put away and the date was 2011, so...
I just cant help it. Cheers Gaz
Done. Had another go with puller but kept slipping through. As Arquebus said try and split it. I use a Dremel type rotory cutter with about 2-3mm...
Mark as per picture there is no pressing out. The 20mm I.D. bush has about 2mm wall and pressed up to a small shoulder so the best I can get on it...
All, Having been inspired (again) this time by Andy's Motorcycle Obsessions I set off sorting my casings out. They have been aqua blasted. The...
Cheers
Diagram does seem to show arrow pointing AWAY from tank. [ATTACH] Sorry - I think I made things more confusing. Cheers Gaz
2 things. When I stripped my tank I think there was a small breather hole in the filler cap, I think you could see it under the key flap. Also, I...
ck_uk Spot on, glad it worked - looks good. Cheers Gaz
ck_uk, To me I think the cast letters and oval boarder are cast higher than finished size, painted then milled/machined and the tops taken off...
Portboy, Had the same problem, have a look at post below. Front Brake Microswitch Must be 6 or 7 years in to my reno, but I think I have turned a...
I got one out by screwing in some theaded bar into the conical nut and then thightening a nut against the cone head and the putting another nut...
Desmo, Have a look at this thread. Splitting Casing - Help Cheers Gaz
I bought some originals, measured up, and modeled in Autocad Inventor. I have the profiles or can slightly change if you give me some dimensions....
Don't usually comment in this section and was going to give Birdie an "Agree" but really wanted my own reply, so here goes. He's a prick and I...
Glad its off. Have a look at the thread I mentioned previous. I found a great difference in viscosity between manufacturers 5wt 7.5wt 10wt light &...
Mr S I have just replaced my oil see thread below https://www.ducatiforum.co.uk/threads/forks-standard-1992-900ss.57382/ I thought I had slackened...
My ref to the primary gear was for Simons benefit I have already done mine in thread below. Splitting Casing - Help Cheers Gaz
I have been concentrating my efforts on the blanking plates. I think I have the profiles as close as I am going to get them and have ordered some...
1992. I was taking heads off anyway but did not want to split casings. I thought I had got away with it but on closer inspection I could just see...
