Separate names with a comma.
Yes, had not thought of that. Cheers Gaz
Simon, Mine was backing out at 12k. Cheers Gaz
Exige, Thank for your comprehensive reply, but I am still a bit unsure. I search all over for something that looked like the switch. I have also...
Patrick, No problem, others have brought this issue up in the past and have been meaning to look into it, it might help someone else. Cheers Gaz
Thanks a lot Derek. Do you know what bike it's off. Cheers Gaz
Hello, Can anyone identify this neutral switch. I bought it not really checking my existing one which the wires had snapped off. I have just been...
Hello, I've been meaning to look at this for a bit. I had a quick measure of the spring and think the rate is about 16 N/mm. I though I would...
Thanks Hejira / Mr R, I think I am going to have a concerted effort to get some blanking plates, thinking back I put some smaller components in...
Thanks all. Regarding preload for new bearings I thought there was a preload, not sure what it is off the top of my head will look up, but on a...
Ducv2 / Bootsam Thanks for the tips. I did heat some rocker end caps to get the bearings out and about 100C was the temp when I heard them drop...
I know I am going to get hammered for this so fully expect it. The reason I have stalled with the reno is I need to clean the casings up. I am...
Few pics [ATTACH] [ATTACH] [ATTACH]
DucatiChappie I have loads of photos I took when stripping mine. Depending where in Derbyshire (I am around Worksop) you can have a copy, or if a...
Simon, I have not got any experience on the electronic ignition models but the torque figure you mention seems a bit high - appologies for...
Glad all back together. It's a while ago since I stripped it and can't remember if they are square or round, but I put the 17.5 I.D. O-rings back...
A few pics [ATTACH] I think one of the other post says which o ring I went for. Just checked it was the 17.5 i,d,[ATTACH] As mentioned I was olso...
I did a post a while ago but it comes u[p error when I search....
Putting back together. Tape up under seal housing as this can move down when you are putting the seal, this did leave me scratching my head for a...
I think this thread from Nov 2014 shows the numbers from K-Tech (thanks SEV), also just looked and Brooks does them. 900ss Carby Fork Gubbins -...
Do you think these need changing? Bike mileage 12k lower bearing [ATTACH] upper bearing [ATTACH] I must admit I am a little confused. I can't...
