Separate names with a comma.
Would agree its a secuity fastener but having taken them off don't think its a shear bolt there is no necking down of shaft, if it snaps off then...
Adecarcer I got one out by screwing in a bolt fully with a nut on it, then using the nut to lock against it and unscrewing but only managed to...
Pylwagl, Sorry I have no experience of this but try this or search her or ducati.ms SilMoto High Pipes on a Carbed 900SS?? - Ducati.ms - The...
Clapton, Search these threads i don't think I linked them properly. Ricambi Weiss – Fairing Panels. Any Good? What are our fairings 900ss-sl...
adecarcer Parts reference. Stein-Dinse GmbH Ersatzteillisten Cheers Gaz
Samurai, I know it's a bit smaller but I used a thin feeler guage to get a similar round retaining ring out of a groove in the rear shock, just a...
Apart from OEM bolts has anyone come across steel bolts zinc plate yellow passivate which is what I believe most originals are. I have searched...
Scott, If you are short of any sizes in places you can't get to or can't take out at the minute let me know (don't give me too many just drip...
Don't want to ambush your thread Johnboy, but I am not that up on break pads material, just want to ask a couple of questions. When the bike is...
Matt, A few people have different thoughts but I would not go down on the front. I personnally feel the radius is getting too tight on the chain...
PeterT, Yes I did think of that. Not sure which thread I said the studs were stainless but if I did it was information I got from other web...
RG Thanks for comments. My thoughts are Time certs look a bit more robust. Reading a few peoples reports on web sites (mainly car cyl head bolt...
JohnB What washing and pre paint treatment are you going to do on the Soda blasted parts you are going to paint. Also what did other do that have...
[ATTACH] Stav, Look at the picture of my studs earlier on in the thread. There is a lager diameter section about 8mm long before it necks down...
Billy, No that is not it. If you do a search on it you will find some pictures. you can only see the side of it and may be the end ofthe slot if...
Billy, While you have the heads off check the crank oil gallery plug is not loose. Cheers Gaz
Billy, Glad all is OK. I presume all threads are fine that's a result. Good pics nice man cave. Cheers Gaz
Duke, I had a look at galvanc corrosion a bit ago and I thought like the fire triangle you had a triangle for this. Remove one of the sides and...
I am not sure they originally used loctite, I can't really see any evidence and it does not refer to ot in the Ducati workshop manual. It only say...
That's better. Cheers Gaz
