Separate names with a comma.
Got on with securing the battery yesterday & today. I need to get the bodywork painted & I knew I was going to have an issue with clearance for...
The front brake is now final fitted & bled up along with the front wheel. I've also checked that the speedo works with the gearbox sensor that...
Made a bit more progress today, now that I'm home for Christmas. Finished off the rear brake pressure switch & got that fitted into the master...
Love it, a timeless body shape, roll on the summer I hear you say !! :upyeah:;)
Spent the day in the garage today making a start on the wiring loom. I want to check it all works before I shrink sleeve it all & route it through...
I have an Autec hydraulic bike lift & a Skylift, both have their pro's & cons. If floor space is an issue you should bear in mind if you can't...
The re-assembly continued today. It takes much longer than you anticipate to re-assemble things after painting/powder coating ! The forks are...
Thank you & it's good to hear members like what you do in your shed/garage, or at least enjoy the process. I'm sure it's not everybody's...
Been to pick the powder coating up today :upyeah: Just got to remove all the screws & plugs now ready to start the final build up. [ATTACH] [ATTACH]
And now the orange is done too !! :upyeah: [ATTACH]
My anodising is ready for collecting later today, so here's a little taster ! :heart_eyes: [ATTACH]
So Chris, it appears that the photo of mine in the earlier post, showing a top view of the magneto/points, is a bit deceiving ! ;) There are...
To be perfectly honest, I've never noticed that !! I'll have to check the other bike when I get a minute to see what that one has fitted as it too...
Me too :grinning: & I'm sure my better half is also !! :joy:
The big strip down has taken place & parts are now out with the powder coaters & anodisers at last. It's surprising how long it takes to do a...
I believe the reason for using a magneto on drag cars/bikes & the like, was that they didn't need a power source & were simple & reliable unlike...
A bit more progress made this past week. Got the top engine mount tacked up ready for final welding, but I'll leave the final welding until the...
My son had a new V4S on road test on Friday & I can assure you you'll not need a heated seat, you're pretty much sat on top of the two rear...
Why is it when you buy bits for a job in advance, when you come to use them you can never find them ?! :mad: Anyway, found the 90 degree...
My magneto arrived from the States last week while I was away, so now that I'm home again I had a bit of a look at fitting it, albeit temporarily...
