Separate names with a comma.
It does sound as if your master has an internal leak.
Ah well, I wonder why you asked the question if you have all the answers. I guess my bikes aren't normal as I don't have an issue finding neutral.
Difficulty finding neutral is a sign of clutch drag. I would make sure there is no air in the clutch hydraulic system before I'd do anything else...
I replaced the wires all the way back to the stator with 2.5mm squared. The stator can't take a thicker gauge. I also got rid of the troublesome...
Seen today at the Super Sausage. 999 chassis with 748 engine and ääähm.....well see for yourself. [ATTACH] [ATTACH] [ATTACH]
First run around the block today. Not quite the rocket it's meant to be yet but a solid start. Sorted out a couple of issues very quickly which...
It's always on the rear. Gets picked up by the front tyre and fired into the back one.
They're nearly identical. 15 39 = 1:2.6 14 36 = 1:2.571 If you're happy with what you have you won't...
It will pass. The rules are crystal clear. Here's a screen shot. [ATTACH]
I bought a bike after the auction as well. Bonham's do a dirty with their online auctions. They shill bid up to the reserve. So even if your the...
I went to see those bikes. Most of them anyway. They don't look quite so good in the flesh. If it looks like an 8 out of 10 in the pictures it's...
You can clean them with brake cleaner and compressed air whilst keeping them open with the battery. As for testing, you'll need a different set up...
It's a special bearing with o-rings or felt washers either side the keep it centred. This will always allow some movement.
Stainless steel bolts are not very strong. Not unless they're made from very special and expensive stainless. Most have a rating of 5.5 which is...
You need to take the idler off! You cannot change the bearing when it's on the head. The circlip holds the bearing in place, the other side has a...
Looks like these need 2 prongs so a screwdriver won't do. The cheap Chinese sets are ok. You might have to grind them a bit as they're just...
Still a way to go. Haven't looked at the brakes yet, the tank is just sitting there, the instruments need a proper bracket, new brake and clutch...
It's alive! https://photos.app.goo.gl/AVo346roDnTLPdYG9
I'll have them please. Let me know your PayPal and I get you paid.
My mate had a hip replaced. Took him 4 months before he could bend it enough to sit on his bike comfortably.
