Separate names with a comma.
I have a 1098 stand on my 748. Much better lean angle. Slightly bigger footprint. Easiest mechanical job you'll ever do.
Clutch slave cylinder seal maybe?
Looks like it has been rubbing on the key barrel. That might be a rubber issue. I would sand it back and put some paint on it. Maybe get a new...
I do pilates at least once a week and try and ride around 200km a week and this is the best option in my opinion and doesn't hurt the bike.
Hi All. I'm traveling to Spain in a few weeks time and fortunate enough to fit in the Aragon MotoGP during my travels. A question for anyone who...
[ATTACH] [ATTACH]
The 996/998 R "decals" aren't black but are a lack of decal with the carbon fibre showing through. Red bikes have silver decals and yeloow bikes...
I have a DP slipper on my 748. I sometimes get that feedback through the lever. It happens most of the time when you change down gears and don't...
I did it. I'v e had the tank off a couple of times since and it make a big difference. It's a PITA trying to unscrew the hose clamps while lifting...
If you don't mind me asking, how much is the EPROM from JHP? I also think the 50mm pipes are a tad big too. My 748 has terrible mid range pull
Excellent. Thanks for the replies
This is also an opportunity to paint it red :p
Hi all. I've had my 2002 748 for about 18 months and have put 10,000 km on it. It's the best bike I've ever owned but down on grunt compared to...
Possibly. I know the later ones are dark silver. IO thought this was the colour for mid 90's 916
If the chrome has completely gone you'll also need to check the surface of the cam lobes for excessive wear. If they have worn this will also mean...
I'm going to be doing the same thing soon. I have a 748 (2002) and have a set of pistons, cylinders and crank/rods from a 916 (2002 Monster S4)....
These engines aren't particularly fragile but what you're describing doesn't sound good. I would suggest that an engine tear down is required. It...
I'd persevere with it. However the job is a bit bigger now. Tat rust hole is the start. You'll find the area around it is very thin and so you'll...
If you're replacing the big o-ring for the unit that's a good time to change the filter. Rubber doesn't really like fuel or oil so will break down...
