Separate names with a comma.
Yes that is correct :)
Just measured the difference on my 1260S chain gauge - I set it as per the book (side stand, Urban, solo etc) then measured on centre stand in...
Off topic but - DO NOT MENTION Tinnitus!. I have it from years of working with IT power supplies. Forget cures they don't work. It is in your...
Correct The chain rivets should be in the middle of the two marks on the gauge. When you have it right (on the side stand) then mark the rivet...
Make sure you have the correct bit to undo the security bolts on the throttle assembly , the bit that came with my kit was drilled off-centre and...
I would think that getting at the rear heads will also be a major strip down job!
I agree, black powder coat and smaller holes, Logo is OK with me. You may want to look at a Sat Nav mount above the dash as well (for Garmin or...
Not on my 18 Plate 1260 but had paint bubble and flake off on my DVT levers, Ducati replaced them under warranty when the DVT bike was about 18...
I have a BikeTrac unit fitted to my 1260 - not had to use in anger, thankfully. It can track your ride if you want via their website.
I have been using a set of these for years, very squishable and easy to pack and to carry. Held 9440 Saddlebag Inner Bags - GetGeared.co.uk
I had this happen on my 1260 after about 6 months, it started to wobble more than normal and the plastic weld on the inside had let go at the...
I have an 18 plate 1260 with 30K on the clock and several UK and European trips (those were the days!). I have Radiator guards for the oil cooler...
In a word YES! I had a Multi rider seat done by them a several years ago and it was OK at first and then it sagged and went lumpy where the gel...
My tracker is powered from the bike battery so that the tracker battery doesn't go flat when it is parked up for any length of time (like now with...
2 1/2 minutes of riding at max revs and the fuel light came on :)
Interesting - I need to have close look at a V4 as I am wondering if these winglets could be modified to fit a 1260 screen? If they could then it...
I had a 2010 S with Ohlins and did 32K miles in 3 years and it was a cracking bike, made in Italy and rebuilt in Surrey! once it got to 20K I had...
Just for comparison my 18K service was £1,100. That was made up of the Labour, Cambelts, Oil, Air Filter, and Plugs as the main parts and one shim...
The Ducati OEM Units are quite large and stick inside the rims and have been known to come unstuck. This happened on a mates 1260. I have the...
I had a 2010 1200S, both heads changed at 12,000 miles and then it was traded it in for a 2013 Twin Spark. When I traded it in it had 32,000 miles...
