Separate names with a comma.
They're available on ebay through Gotham Cycles and many other retailers. They are a pain in the arse but worthwhile[ATTACH]
Not certain Olly. I never count them but I think it's a couple more than that. I can count them when I get home from work. Cheers
If you get a stand that stays down seriously consider fitting the neutral safety switch circuit to ensure you can't ride off with the stand down....
This has come up quite a few times taht I can remember. For some reason Ducati decided not to keep a rebuild kit for the front MC. So unless you...
I'm not an expert and have not measured the valves but I would expect that the S4 exhaust valves will be noticeably shorter and not...
The 996 biposto is all red. The white number board at the front was not standard on any model that I am aware of. The SP/R models had the mono...
I'd count the front sprocket again. I don't think there is a 16T one available and from my experience with the 15, probably wouldn't fit. I use a...
Ohlins rear. TiN forks. seems that all the important bits are OK. Might need a new radiator. And it's black : unamused:
Looks like you need to swap over some of the internals from the stock levers, which is fine, but they look sort of feeble. What are they made from?
Fairly easy to exchange. I've done it several times. When you have the throttle bodies off you can use a perfectly sized socket as a drift/punch...
You can buy Chinese copies for very little (complete set of 3 locks including ignition barrel and fuel cap) but the quality is not great. Good...
Yes. Change of ownership of Ducati in 1996 means no more elephants on the parts (except leftover parts) and a change in the decals on the tank and...
I'd spend some time making sure all the connections in this plug are in good condition. I had a problem recently where I got stranded with the...
Yep. Master and slave are all the same.
Take off the price what it will cost to fix it and that's its true value
You have the wrong plugs in the engine. The only way you can get them out is with a thin wall spark plug socket or you have to grind down a bit of...
First thing I noticed is that you're trying to start it with the fast idle button. That opens the throttles slightly and produces too much...
OK. That's scary. You certainly need to get to the bottom of what's happening
The little o-ring seal on the push rod needs to be in good condition. Check that it's not nicked, or missing
Although none of these are exactly your bike you might be able to get enough info for your needs:...
