Separate names with a comma.
Use the gates carbon drive app for tensioning your belts. Ping longest run of belt. Aim for 110Hz. Check pulley bearings and replace if in doubt....
Wishful thinking. Those calipers are scrap.
I use a Vodafone curve. It's not specific to bikes, it's just a key fob you can put anywhere. Very inexpensive. The only downside is battery life...
https://cohpro.com/product/fuel-hose-in-tank-7-3mm-id/ You need some of this inside the tank. About 35cm. I use this and it fits nice and snug....
Soak them in vinegar for a day or two. Gets rid of the oxide and you may be able to make a better judgement.
5/16 i.e. 8mm
Number of ports is irrelevant. All you need is one USB port.
I presume you talk about JPDiag? If so a Chromebook won't work. Needs to be windows based. It's a simple software so anything from Windows 7...
I bought some seals of powerhouse recently. I also had them re-coat the caliper bodies. They did a good job. To be honest it would have been not...
I'd say a magnet will tell you if it is Aluminium or not. I clean my tanks with normal white vinegar. Well I clean pretty much everything metal...
My oldest bike is 70 years and it does have European break down cover as well as all the others. Comes with the insurance.
Stating the obvious.... Your hose it too big. What ID is the old plastic hose? I bet it's 1/4 or 6mm and your rubber hose is 8mm or 5/16 which is...
It's the way Ti sheet looks when it's new of the roller. I don't know of a way to replicate that. Vapour blasting the sleeves would give a uniform...
I had a Sunbeam with a very similar issue. I found the throttle slide to be slightly worn allowing too much air past. Fixing that improved matters...
￡11.24 20%OFF | CNC Reverse Shifter Gear Shift Lever Peg For Ducati Monster 748 916 996 998 SuperSport 620SS 750SS 800SS 900SS 1000SS ST2 T3 T4...
The fuse is there to protect the circuit. So it depends on the wires. If they are thick enough you can up the fuse. Here is a guide for flexible...
