Separate names with a comma.
Sometimes bits get left in the engine when assembled at the factory. I know of a 1098 that had a piston ring circlip found in the drained oil a...
No idea. Perhaps when the coolant reachs a certain temperature the ECU turns it on?
It may be that your diagnostic program just doesn't activate that fan.
Both fans are activated by the ECU providing an earth. The LH fan No.1 by ECU Body connector pin 11 and the RH fan No.2 by body connector pin 14.
The prices from Ducati are £189.59 for the pump and a £23.48 for a filter. I can't find a price from the mesh pre-filter. There is one listed for...
Fairly recently, early this year I believe.
The pump is inside the tank. Item 2 in this diagram. Item 12, the fuel filter, would be best changed as well. Access is through the filler...
It's not necessarily main bearings that's the first thing that sprung to mind and these don't look like main bearing bits. I'm not familiar with...
Brass doesn't stick to a magnet. Brass like filings could be from big end bearing shells. Lots of any kind of filings should be cause for concern.
Before condemning the shock bearings check that the rocker bolt (14 in your diagram) is fully tightened, it should 75Nm. I had an ST4s which uses...
I doubt if it will be as easy as that Fin. The cast rockers are seized to the steel spindles and the spindles are seized onto the alloy head at...
I don't have access to Dingbro but my local bike shop uses the Deblock Oil. I'll speak to him and see if he can get me the Deblock Ice. I like the...
I'll buy some Plus Gas tomorrow and give it a go and let you know how I get on.
As I see it the trouble with using electrolysis is that it won't penetrate any better than the Deox-C and I think it would have a deleterious...
I'm happy to try anything Andy. The main trouble as I see it is that the rockers are about 75mm long and have quite a close clearance to the...
I'm hoping that some of you might be able to give me some tips about unfreezing parts that have rusted together. I recently acquired a BSA ZB32...
I think he means the spherical bearings in either end of the shock which Ducati doesn't list. I replaced those in a 900ss that I used to have and...
Yes Jon, I appreciate it can be done but assumes a certain level of knowledge that the OP may not have.
Not quite so straightforward Jon. There is spacer between the spring and the fork top that needs to be pushed down against the spring and held...
Pity you're so far away, I could certainly use these.
