Separate names with a comma.
I have a well used DP one which fitted perfectly on my 748, if you are near Swindon, you can borrow it for a measuring/mould purposes but I will...
Indie you need to call him. If you need to leave the bike there is a regular bus (to Wells IIRC)that goes within 2 miles of him, it stops just...
At the risk of being flamed I have to say I ain't a fan of the RSV, its fugly and looks like a failed Kawasaki design exercise to me (Is that why...
Or just take the switch off the stand put it in stand up position and stow it between the cylinders
Pete, you have a pm. The alarm has internal relays which may interfere. Usually the fuel pump/ecu has a splice on the switching side of the...
Pete, have you done the correct pin out for the Meta, there are different ones for the 357T and 357TV2 and neither have a short on pins 4 and 5?...
Carlo, there is no substitute for a custom map IMHO and this can only be done with a careful and extended run in the dyno room. DP chips might...
FWIW part numbers for the base 999 03 Bip grey swing arm Showa shock are the same as the base 999 06 black swinging arm Showa shock, there are...
Have to say, I have had both my 748 and 999 set up for me (12 stone) by Rich Llewelyn, both are set up for road use and both are set up much...
Its Pankl without the e (Pankl includes CP pistons and Carrillo rods as quality components within their product range) not sure that affects the...
Andy, How far south are you prepared to go? Nelly at Cornerspeed (on here if you look) at Sutton in Ashfield or further south Baynes Racing at...
Carlo, these will work,...
Nick, already a thread on this bike https://www.ducatiforum.co.uk/threads/help-916-engine-frame-numbers.7035/ looks to be genuine
Carlo, Abba stand or a pair of axle stands under swapped/reversed footpegs, on mine using an Abba stand the rear wheel drops around 10mm but I put...
Foz, do you use conventional/wax chain lube? If so get some brake cleaner and a can of Wurth dry chain lube, clean the disc and pads with the...
Carlo, it takes 5 minutes to take the shock out (two bolts that need a long reach allen wrench in a ratchet drive, 8mm IIRC). If you do it...
The pump has its own bypass to maintain a continuous 5 bar but not loose the fuel cooling effect by losing flow, it is capable of delivering over...
Al, it is obvious where the considered and sensible advice is on this thread. Breakout's advice comes over as the rantings of someone who has had...
Folks, Falloon's Standard Catalogue lists 199 916S Monos as a separate entry with confirmation in a number of books on the bike, all built in 94....
Dave, have you got one of these yet? https://www.ducatiforum.co.uk/threads/748-916-996-998-paddock-stand.54930/ if not you will need one very soon
