Separate names with a comma.
For road use the standard pads are difficult to beat and don't wear the discs prematurely, I don't do track days and hate EBC HH due to a lack of...
New set of forks here for £300 if you get silly quotes for...
Bill, the 748/916 is about as extreme a riding position as you will get on any road bike, if you are using it for cruising around your local...
CR those all look past their best, 6 of the 8 openers need repairing and the other two are well worn, the closers don't usually wear much so will...
Simple answer, none. Looks like some expense is imminent unfortunately
Try warming it up with a hair drier and put a very light smear of Vaseline on the T piece
The poor contact causes resistance and as little as 0.5ohms has a heating effect which causes increasing resistance and more heat, eventually you...
Bill, if there are three yellow wires you have the 3 phase alternator system fitted to later bikes which did not have the circuit on the 'gen'...
Early single phase bikes have a connection from the regulator/rectifier DC side which is red- white, brown IIRC and you will see the red wire on...
Pete option 1, you will destroy it Option 2, I have an new/unused 357T V2 if you really want one but it has been in a cupboard for a couple of...
I am used to all sorts of people taking a step back and taking in the view of either the 748 or 999, usually in petrol stations, usually with an...
Have to say I am not a fan of the later style black swinging arm as they are very bulky. Refinishing the grey one and painting it black looks...
OR, hope this is not too lengthy but it may help to understand the ‘enrichment’ you referred to is not how the system works with a modern(ish)...
CR, I am not convinced the 190/50 'standard' rear tyre size is right for the wheel so have the 180/55 standard 749 size rear fitted
OR, the thermostat starts to open at 75c so the engine is supposed to run at that sort of temp most of the time, it seems cool but that is how it...
Thanks all, looks like it will be AR or B&C for the anodized alloy Renthal rear sprocket, although AR do list the 38 tooth one on their site, B&C...
CR, yes, the triangular lug is still there Not sure, that is how it was when I bought it, could be simply filled with body filler.
I want to change the chain and sprockets on the 999 and would like to go from 36 to a 38 rear (I'd prefer steel but hard anodized is OK) and...
They all do that sir, mine barely gets over 65 on the open road although just recently it has been even lower
John, Ricky is correct it has a 1mm pitch thread on the preload adjustment screw, 10mm is ten complete turns out from fully home. You measure...
