Separate names with a comma.
Brilliant. And I've fUK supplier for the flat plates to locate at the back of them. :upyeah: https://www.lasaero.com/products/article/G3U5NYJH
So Suzuki part is the same. I wonder if they are still available? The Tinnerman rivets and flat plates look the part as well. That given me some...
I just emailed him.
Found him. I see he only operates through Facebook :rolleyes:
Who is "Tom I"?
We'll see soon enough.
The main fairing fixings are Dzus fasteners. The fixings holding the top and bottom fairing halves together are rivets on the very first bikes,...
My son is currently restoring his 1994 916 Strada, yes it is a Varese built one. But a stumbling block is trying to find a source for the original...
Is you 1098R a Fiat? ;)
Last year I had to replace the master cylinder on a friend's Classic. I didn't want to push air all through the system so I fitted the cylinder...
Yesterday, from a Ducati Glasgow customer: "I will just clear this up for a few on here. As this really got me worried since I have a deposit...
Only if the ECU thinks the stand is down
you could fit an additional relay into the yellow/red wire between the headlight relay and the dip switch. Trigger this relay from the fuel pump...
The side stand switch doesn't earth through the mounting bolts, it earths through the black/green wire to somewhere on the frame or engine - which...
Yes. I believe so. Pins 1 and 2 are bridged by the switch to make the circuit, enabling the engine to run. You should get continuity between these...
The clutch switch won't cut the engine. It only prevents the starter if the bike is in gear unless the lever is pulled.
There shouldn't be a grey wire. The wire from the stand switch to the ECU is either white/red or white and it goes to pin 38 of the grey (Body)...
I might have given you some duff information! Although the MTS1000 wiring diagram quite clearly shows 12V on the black/green wire, supplied via a...
All I can tell you is that the wiring diagram shows a white/red from the side stand loom connector directly to pin 38 of the grey 'body' connector...
Whatever is going on the ECU thinks the stand is down despite the new switch. As Paul says, check the connections to the switch. It should be just...
