Separate names with a comma.
Pete, I have tried 5 or 6 different mounts and so far and this bracket[ATTACH]...
They came out with a plumbers water pump pipe wrench as my pliers were just not doing it, slightly damaged but useable. Left side was easy, right...
Is there a trick to get the standard plastic OEM bar end plugs out without butchering them? Bike is a 748, originals have never been out and I...
gdbd, try this site http://www.gearingcommander.com/ it indicates a 98 link chain for stock set up using 15F 38R sprockets but the bigger rear...
Pm sent on the hugger/chain guard
Time to try something else, there are a few that are much better in the wet (and dry)
CR, Rich set mine up almost the same, it is not that far off the factory starting point.
Wooly is that a late model one? Best list part number, if you can, as the late ones for the last built MY02 E and S bikes are not compatible with...
999 Spec is 243mm +/-1mm from the machined top edge of the bottom yolk fork clamp to the top of the fork tube(same setting but slightly different...
CR I am using the 180/55 M7RR, not convinced the 190 is the right size for the wheel or the bike's handling, despite what it says in the book....
MY02 748s had the grey vinyl seat also, they stained easily and wear badly due to the mid grey shade. Easy enough to recover if you can get the...
If anyone is interested the precise size requirements in force now are here from page 9...
Noods, from that book you can pull the data to make it more useable. However I believe there was MY02 production into 2002 which my copy does not...
Folks don't get hung up on vins that have things like ZDM748Sxxxxxxx or ZDM916Sxxxxxxx. The S in that part of the Vin does not mean it is the S...
Rip, a small detail that would have been good to know earlier. One of the usual Meta alarm (357T or 357tV2) circuit splices is on the the...
Fab, I have an 02 registered MY02 with 39k miles on the clock and drive it whenever I can (also drive a 999), I have had it for 10 years and will...
Riko, you need 100kms or more to get the pads properly bedded in before they will work at full capability, that bedding in period is longer if...
Fab, either post up some photos showing forks, discs, shock, body work. Alternatively send an email to Ducati with the engine and frame numbers...
Nelson, great news:upyeah::sweat:
Late model 748E and S models have no oil cooler, the engines usually run cool except in town on warm days. I am not convinced they are necessary...
