Separate names with a comma.
Factory quoted torque is 25Nm with lubed threads, does not seem too high. One to note in the book for the future.
My comparison was mainly with worn out tyres on both bikes but have just (within the last couple of weeks) fitted new tyres on the 748 which...
Joe, my experience of a 748 and 999 are similar to yours but the 748 is significantly more precise and very much more of a sport bike - perhaps...
Only takes a short while to fit them although the strap bolts can be a fecking nightmare, fit them and try it on short run. If it doesn't work...
My JHP Ti cans are 45mm inlet 54mm outlets with rest of the system standard 748/916 45mm, I think they were produced by JHP for the 998/996. IMHO...
IIRC the cables have strong connection to the railway industry:locomotive: ExactUK
CR, 15 minutes as long as I can find the spring puller. Mine broke a manifold just as I overtook an open top VW Golf, the sudden BLAAAAAAAAAH...
Anyone with a late MY02 748E or 748S with the variant Zeuna exhaust system (manifold and header one piece rather than two) which are prone to...
Chris will know the story of the brown spots on the frame, casing, cam belt covers and battery box damage which is all due to a few ccs of battery...
Maybe a silly question but are you using the same tyre pressures as before?. 32f 34r for road use is the sweet spot (Ducati recommendation, not...
If your cables look like this then you won't be shot at dawn [ATTACH] [ATTACH] Probably should have cleaned the yellow bits a little and maybe...
15 miles west of Oxfordshire in Swindon Cobra Leathers £50 for a front main zip or trouser/jacket zip replacement. Best to call but the quality...
Make your self a cup of tea, take a deck chair into the garage and go and feast your eyes, then make another cup of tea and feast some more
Both my 748 and 999 emit visible clouds of water vapour (like all vehicles) whilst warming up which is hardly surprising as the engine takes in...
Chris, you have to ask yourself how much are you prepared to spend, also how many miles have they done and is it worth the expense. A 916 is now...
Stripped down the 748 today to try to locate a persistent low level coolant leak. Expecting to find the usual split on the seam of the header...
Red, in 10 years I have only seen two 748/916/996/998 bikes with white clocks, yours in the picture on this thread and mine as fitted to my 748...
The pin on my DP stand for a MY02 748 with standard 5 spokes (same rolling chassis as the 998) is 25.6mm and 21.7mm for the outer it. It goes all...
Try Metzeller 01s, loads better than the Pirellis, Dunlops or Bridgestones [MEDIA]
There are some pretty good videos on you tube which demonstrate exactly what you need to know, this one is a good starter [MEDIA]
