Separate names with a comma.
CR, I got it looks like it will only work the right way and will be obvious when it is seated the right way. No need for a photo. Thanks, little...
Thanks folks, just the stuff I was after, more questions. Is the torque 42Nm? My manual is for the red framed black swinging arm era bikes so I...
Long hex bit? Do you mean a long reach socket or an allen key style hex key on 3/8 or 1/2 inch socket drive? Also what sizes please, I am about...
NorfolkNGood, They were on sale here for £68 plus vat (new) quoting a RRP of £98 Ducati 998/996/916/748 Performance Parts @ Ducati Parts Online...
As stated check for the stamped FOR RACE USE ONLY on the lower rear of the box. Also compare the two pictures, small exhaust outlet is oem, 2nd...
Witchellski, the former alarm splices are a good place to go if you do not have voltage or have intermittent voltage on that red wire in the three...
Witchellski, the two relays have a switching supply and the switched supply (pump and ecu power supply) , from what you describe the switching...
Thanks Nelly, these are new forks so I may put some oil in just to flush them a little then set to the 132mm level, I do not intend stripping them...
Folks, any recommendations for replacement fork oil in for my 748? Motul Factory Line, Shell, Rock Oil or Silkolene. They are standard spec...
Scott, you really need to try them on and I would advise getting them slightly tight and slightly short on the leg then using Gliptone or similar...
Old rider, if your bike is mobile drive it to Louigi Moto, Rich may be able to do it whilst you wait or get you onto a bus route to Bath railway...
Shane, hopefully not teaching you how to suck eggs but disconnect the rear light cluster and test for continuity between the two bulb + lines....
Either read the wrong torque setting, confused Lb/ft and Nm or incorrectly set torque wrench. Also some of the torque settings in ally threads...
Gareth your right, I gave you the pre 02 US vin spec, not a lot of use for a UK bike of that age, disregard:blush:
CR, the repair manual states that the "gear change indicator 2 flashes every 1.6 seconds to indicate the immobilizer is active. After 24 hours...
Gareth, the fire that delayed production was in early 94 and is supposed to have affected the paint shop so my guess is the panels would normally...
That will be this then, best contact Ohlins. [ATTACH]
Slightly confused here, are you trying to restore the bike to original spec? Is it a 998, 998S or 998R? As Toby says you have standard 998 wheel,...
G, one thing I would do is inspect all the plastics for manufacture dates. Each of the fairing panels, mudguard, seat panels, and the seat itself...
These are similar to the later ones that were fitted from around 1998 although these have the TiN coating used on the R and later S spec models....
