Separate names with a comma.
Joe, the switch mounts on the outside of the stand pivot bolt for most bikes (when it is fitted), IIRC the part number for late STs is the same...
750/900SS bevel from the 70s, why? Because it is [ATTACH] [ATTACH]
Exige, I am wondering how the rider manages to stay on the tank. Never seen an SV650 without crash bobbins, even this bike has them?
CR the coil is confirmed as dead, swapped it to the vertical cylinder to check. Cleaning it and drying it off has not improved it, unfortunately
Similar thing happened to me on Tuesday, but it was only an SV650, my excuse was the 999 was only running on 1 cylinder, still did 70 easily...
It was Craig, part number is now 38010143A, he said they are now on the fifth version of this coil. No longer a stock item but will take two days...
Mark, Rich Llewellyn, AKA Louigi Moto, the best in the business
Later ones have a different part number and a flying lead ( looking at the pictures), probably not compatible plugs between the old and new versions??
Crystaljohn, I wasn't and have now taken the tip, spring and seal off and put it back in the oven, this time for 30 mins at 100c. After the first...
Cream, already got one ordered after reading your post on a recent thread - if I need to get the grinder out it helps to have most of the work...
Coils dried and resistance between pins 1 and 15 measured at 0.32 ohms, spec is 0.6 to 0.7 - New coil required.
Thanks Chris, just the sort of info needed, coil is now out and it is wet with water dripping from inside. It is now in the oven at 100c for...
Yesterday started the bike up at work and it was badly missing on one cylinder, run to work in the morning was uneventful with no indications of...
Get the ride hide and suspension settings done properly by someone who knows what they are doing, with newish tyres and chain. Factory settings...
Andy, MY02 748E (base model) like that had 3 spokes in the grey colour and no Dzus fasteners, the 5 spokes and quick release Dzus fasteners and...
Bluey, I had this done on my 748 (by Rich and Chris) and the result was power and torque up 15% from stock and a transformed bike that even...
Xivlia, 13.3v with the engine running is not that good, to charge a battery the alternator and regulator delivers higher voltage than that....
Xivlia, ignore the readings from the Oxford Optimizer, I have an Oxford Maximizer 3800 myself and on the bike setting it is no good as it has...
Red, would an an impact driver fitted with a 150mm or 300mm 1/2" extension and an oversize torx work? Rob5, WD40 is no good as a penetrating...
Advikaz, not confused, the clue is in the thread title. In any case turns out the 899 has to have tyres which are currently supplied by a limited...
